When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That's a great idea. At what point do I need to purchase extended studs? Over 3mm?
The info I've got stuck in my head is that you can use standard length studs when 5mm or less, just like Brad said here. More than that, and you compromise the thread count, and need to use extended length studs.
In so far as minimum width on spacer adapters, I think that's 15mm.
Originally Posted by blnewt
Could run a 275/35 rear with camber in the -2 range.
Z puts a lot of miles on his cars. I suspect he wants a more normal camber.
The info I've got stuck in my head is that you can use standard length studs when 5mm or less, just like Brad said here. More than that, and you compromise the thread count, and need to use extended length studs.
In so far as minimum width on spacer adapters, I think that's 15mm.
Z puts a lot of miles on his cars. I suspect he wants a more normal camber.
I actually get out of the military this summer, right before the annual meet this year. So no more trips between NC and NJ. My annual mileage will be going down quite a bit. And now that I no longer have an AWD G, I'll be looking into purchasing either an older Toyota Tacoma, 4Runner or a Subaru Forester as a daily/winter car.
Zahy, too bad you don't have a coupe regarding those Volks, perfect offsets then. I've got the feeling you're not going to dig the poked fitment since you're really wanting those (4) front Nismos. I'd still continue pursuing those or talk w/ Ravspec, I still think the SSRs would be a go without spacers based on that other member running quite a bit more conservative specs w/ his BBK. And I'll dig around too.
Here's some new gunmetal front Nismos new~ https://conceptzperformance.com/niss...6a_p_13367.php
And a cheaper link (I've ordered a few Infiniti parts from them) http://www.quirkparts.com/nissan/370...-and-trim-scat
And the deal of all deals at $279.24 per (have not dealt with them though) http://www.oemautopartsandaccessorie...ed7b278965c8f/
Nice find on that last link Brad! I've been searching for 4 fronts in that Nismo wheel too. Unfortunately when I load 4 fronts of the 2012 style 370Z wheel, front or rear actually, the only thing that gets added to their cart is "style #3." I'm wondering if they're out of stock on Nismo wheels and the cart is only filling whatever wheels they have in stock...worth a phone call.
I think the part number for the '09 Nismo wheel is D03001A36B?
Edit- I persisted with the cart at the last link and at checkout it says "out of stock." I wonder if anyone who lists these wheels for sale actually has them.
Last edited by Coltrane1; Apr 13, 2017 at 11:01 PM.
Nice find on that last link Brad! I've been searching for 4 fronts in that Nismo wheel too. Unfortunately when I load 4 fronts of the 2012 style 370Z wheel, front or rear actually, the only thing that gets added to their cart is "style #3." I'm wondering if they're out of stock on Nismo wheels and the cart is only filling whatever wheels they have in stock...worth a phone call.
I think the part number for the '09 Nismo wheel is D03001A34B?
Just noticed you have Stance XR1 coils, how do you like them?
Nope, referring to these, which are also made by Rays, Forged, and the fronts only weigh 21lbs.
Oh, then D0C001A36A may not be the correct part number then. I see the wheels you want on ebay all the time as well as the 370Z forums. Everything is in CA for whatever reason, damn you guys and your warm climate.
