I recently changed my rotors and brake pads and now i notice my brakes makes a high pitch squeel now when i apply the brakes. I did not purchase any new shimmies so can anybody tell me what the problem is? or is that the problem.

 

I am having the same problem! Going to take it to my mechanic in a couple weeks to figure out what it is....

 

Was grease applied behind the shims and the sliders?

 

My experience if they are OEM they just squeal. I cleaned the brakes, applied brake grease, same result. It wasnt until I went aftermarket that the squealing went away.

 

I am using. aftermarket slotted and drilled rotors but I am using the s model akebono pads.

 

just noticed my 2 front rotors were installed in couner clock wise will try to fix this weekend and see if noise persists.

 

It wouldn't matter which your rotors were installed unless they have directional vanes...and I highly doubt they do. And even if they do, it wouldn't cause the squeeling.

Check to make sure you have the pads installed correctly (inner/outer). Also, did you "bed" your pads properly?