I'm wanting to drop my G on a set of Eibach Springs and use some Spacers for my wheels. But this is my car first that I'll have aftermarket springs and spacers on... so..I'm a newbie at this.

should I have any problems?
what kind of spacers should I use?
camber kits needed?
where is the best place to buy the springs and spacers?

thanks

LOI

 

Haven't heard of any problems with the coupe on Eibachs. They also make spacers too as do a couple of other manufacturers.

Camber kit is only available for the rear. It is not required unless you want your rear alignment within factory spec.

 

I'm running 15mm spacers on my G37 on Tein S-Techs, and don't have any problems with rubbing, vibrations, etc. I will recommend a camber kit though. Im running the SPC Camber Kit

 

I running tanabe drop springs with a 3/4 inch spacer on the rear. It brings the tire right to the edge. looks dam good.

 

Im with Jweb3 on this one.. we are running the same thing and the car is perfectly fine.

 

Where can I get the spacer? I am going with H&R springs and SPR camber

 

Andy has them here!

http://hpautoworks.com/index.php?mai...54876eea8c5dcf

he also has 25mm and another

 

^heres eibachs! kinda wish the rear was a bit lower, the HRs are sexy too. my buddy got them.

 

Thanks for info fellas. Tfonng37 your swagger looks sexy