When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi so i have a g37x tuned by uprev and i went to jump my buddys jeep .. after attempting it those 3 lights came on and wont go away.. ill try disconnecting my battery and letting it al reset but if anyone had a similar problem or know whats up id appreciate the help!!
Hi, I put lowering springs on my g37x coupe and the same three codes popped up. When taking out the strut I did hit a wire which I believe to have been the wheel speed sensor. The wire looked fine and nothing happened but days later the 3 codes came up. I later went on and took off the wheels and found that the brake line nut was lose and I tighten that and also tightened the bolts on the struts up top and the codes went away. However, a few days later they came back and I checked everything was good. I believe it’s my wheel speed sensor but I don’t know how to fix that. Do I need a new one or is there anything I can do to fix it and get rid of the codes. If you have any suggestions please let me know!!!!