Body Interior Exterior Lighting Reviews on body interior exterior lighting for G vehicles.

Review OEMassive Coupe headlights

Thread Tools
 
Search this Thread
 
Old May 22, 2018 | 08:05 PM
  #61  
xxg00w0's Avatar
xxg00w0
Registered Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Nov 2011
Posts: 698
Likes: 29
From: los angeles
can you take some pics under direct sun light? i wanna see how bright they are.
Reply
Old Jun 21, 2018 | 11:15 PM
  #62  
Ryemageddon's Avatar
Ryemageddon
Registered User
 
Joined: Jun 2018
Posts: 4
Likes: 0
From: Texas
Originally Posted by Arxylis
I'm not sure about the high beams that come with it. I got LEDs from Hikari and they fit but I had to modify the round cover so that I could run the cable through that goes to the LED driver. I zip tied the driver to the headlight wiring harness. Unfortunately, I didn't get any pictures of this.
How did you get the Hikari H7 LEDS to fit? I purchased the same setup and tried to install them today and the clip for the standard h7 bulb won't go over the fan/back of the Hikari LEDS. I'm baffled by how you made it work/fit?!?! Any help would be GREATLY APPRECIATED!! 😀👍
Reply
Old Jul 9, 2018 | 02:39 PM
  #63  
RickyBobby's Avatar
RickyBobby
Registered Member
 
Joined: Nov 2015
Posts: 127
Likes: 13
From: CO
I agree these are a bit busy for the G’s lines but like that it shows GTR similarities. How has the quality been? I’ve seen some LED WRX taillights that I like but the build quality is awful. So many people’s LED’s on those burn out and sure they have a 1 year warranty that they honor, but kinda SOL after that year’s up. These been holding up?
Reply
Old Jul 10, 2018 | 10:17 AM
  #64  
Arxylis's Avatar
Arxylis
Thread Starter
Average Joe
 
Joined: Sep 2015
Posts: 170
Likes: 51
From: Indiana
Originally Posted by Ryemageddon
How did you get the Hikari H7 LEDS to fit? I purchased the same setup and tried to install them today and the clip for the standard h7 bulb won't go over the fan/back of the Hikari LEDS. I'm baffled by how you made it work/fit?!?! Any help would be GREATLY APPRECIATED!! 😀👍
Sorry for the delayed response, I'm not on here much anymore.

If you partially insert the bulb, then flip the clip over it, you can insert it the rest of the way and get it to latch. It takes a bit of patience to get it to line up right.
Reply
Old Jul 10, 2018 | 10:19 AM
  #65  
Arxylis's Avatar
Arxylis
Thread Starter
Average Joe
 
Joined: Sep 2015
Posts: 170
Likes: 51
From: Indiana
Originally Posted by RickyBobby
I agree these are a bit busy for the G’s lines but like that it shows GTR similarities. How has the quality been? I’ve seen some LED WRX taillights that I like but the build quality is awful. So many people’s LED’s on those burn out and sure they have a 1 year warranty that they honor, but kinda SOL after that year’s up. These been holding up?
I didn't have any problems with LED's burning out or moisture ingress. I traded my G in at the end of February though so I don't have any other updates on the lights.
Reply
Old Jul 10, 2018 | 09:13 PM
  #66  
saywat?'s Avatar
saywat?
Registered Member
iTrader: (3)
 
Joined: Jan 2016
Posts: 3,227
Likes: 277
^wat are they giving for g37 trade ins now days?
Reply
Old Jul 10, 2018 | 09:17 PM
  #67  
Arxylis's Avatar
Arxylis
Thread Starter
Average Joe
 
Joined: Sep 2015
Posts: 170
Likes: 51
From: Indiana
Originally Posted by saywat?
^wat are they giving for g37 trade ins now days?
About 7k for mine. 110k miles, 2008.
Reply
Old Jul 17, 2018 | 10:59 PM
  #68  
Ryemageddon's Avatar
Ryemageddon
Registered User
 
Joined: Jun 2018
Posts: 4
Likes: 0
From: Texas
Thanks for the info. I went with a different led bulb that fit easier.

On on a different note I figured out what that extra block of light is above the “core section” of lighting. It’s the inner square lens closest to the round high beam lens. I don’t see there’s any adjustment for that specific one though.....
Reply
Old Aug 6, 2018 | 08:22 PM
  #69  
alberto555552's Avatar
alberto555552
Registered Member
 
Joined: Jul 2017
Posts: 47
Likes: 0
Anybody know how I can have the LED accent strip ON all the time like a DRL without having to switch on the parking lights?
Reply
Old Oct 25, 2018 | 11:53 AM
  #70  
CWorksDesign's Avatar
CWorksDesign
Registered Member
 
Joined: Jan 2017
Posts: 100
Likes: 39
From: Houston, TX
Has anyone found a fix for the light bleed making a box shape on the garage door?
Reply
Old Oct 25, 2018 | 10:39 PM
  #71  
mummy2's Avatar
mummy2
Registered Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2011
Posts: 968
Likes: 140
From: Baltimore
Originally Posted by CWorksDesign
Has anyone found a fix for the light bleed making a box shape on the garage door?
Mine are the same way. Probably just going to have to live with it. The light pattern is horrible but it does illuminate every thing in front of you.
Reply
Old Nov 2, 2018 | 03:29 PM
  #72  
Japan's Avatar
Japan
Registered Member
 
Joined: Sep 2018
Posts: 45
Likes: 1
How have these held up a year later??

How have these held up? Im stuck between going with these since it seems to be cheaper than buying one oem headlight ... my stocks have water in passanger and caused ballast to go.. so need something asap
Reply
Old Nov 2, 2018 | 03:45 PM
  #73  
mummy2's Avatar
mummy2
Registered Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2011
Posts: 968
Likes: 140
From: Baltimore
Originally Posted by Japan
How have these held up? Im stuck between going with these since it seems to be cheaper than buying one oem headlight ... my stocks have water in passanger and caused ballast to go.. so need something asap
i say go for it. I paid $360 something with the 15% off coupon eBay runs once a month. They look cool and they do illuminate your entire field of vision. Haven't been flashed yet. Those box things do light up road signs from quit a distance. You don't really notice it unless you're facing a building though. You'll need to buy a new ballast cause you're supposed to transfer your old ones over. Install isn't hard just a little time consuming if it's your first time doing it. I suggest a cordless drill or impact wrench. Also I had to push on the headlights before i tightened up the screws to get it to line up. I did it myself but a Nissan/infiniti shop said they would have charged a 100-150 dollars. I didn't take off the entire bumper either. I took off everything except the ones on the bottom. Just lay a sheet on the ground and you can just bend the bumper out of the way. I still have a little gap where the bumper meets the hood but I'll try to fix that later.
Reply
Old Nov 2, 2018 | 03:49 PM
  #74  
Japan's Avatar
Japan
Registered Member
 
Joined: Sep 2018
Posts: 45
Likes: 1
Code? Lol

Whats the code I have mine in ebay shopping cart for $420
Reply
Old Nov 2, 2018 | 03:54 PM
  #75  
mummy2's Avatar
mummy2
Registered Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2011
Posts: 968
Likes: 140
From: Baltimore
Originally Posted by Japan
Whats the code I have mine in ebay shopping cart for $420
That code been expired. You'll have to download the eBay app and accept notifications. About once a month for 1 day or maybe a week they will give out a code for 15 or 20 percent off your entire purchase. A couple of weeks ago was the last time they did it
Reply



All times are GMT -4. The time now is 12:32 AM.