Body Interior Exterior Lighting
Sponsored by:
Sponsored by: CARiD

Help power window problem

Thread Tools
 
Search this Thread
 
Old Dec 2, 2012 | 02:16 PM
  #1  
B30CBLUE's Avatar
B30CBLUE
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 4
Likes: 0
From: so.indiana
power window problem

09 sedan new to this car. car running only driver window goes up&down. turn car off the other 3 windows work fine. start car and back to only drivers window works. also had battery out of car before driving car maybe problem there. have used search function here and have not seen this problem. thanks for any help
Reply
Old Dec 2, 2012 | 02:34 PM
  #2  
ilovejdm07's Avatar
ilovejdm07
Registered User
 
Joined: Feb 2007
Posts: 7
Likes: 0
roll the window down then roll it up and hold the button for 10-15 seconds... Repeat on both sides. Problem solved

Resets window swtichs
Reply
Old Dec 2, 2012 | 09:38 PM
  #3  
B30CBLUE's Avatar
B30CBLUE
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 4
Likes: 0
From: so.indiana
does the car need to be running. if not what mode- run- acc and is this reset done at each door switch or from the drivers master switch
Reply
Old Dec 3, 2012 | 12:43 AM
  #4  
Rad_Slinger's Avatar
Rad_Slinger
Registered User
iTrader: (12)
 
Joined: Dec 2011
Posts: 2,978
Likes: 83
From: New England
Originally Posted by B30CBLUE
does the car need to be running. if not what mode- run- acc and is this reset done at each door switch or from the drivers master switch
Just do a search. There's literally a dozen posts on how to do the window reset.

If you don't feel like searching, then just read your owners manual....it's in there. You should have read our owners manual anyway.

Please take the time to educate yourself.
Reply
Old Dec 3, 2012 | 08:15 AM
  #5  
2008G-Man's Avatar
2008G-Man
Registered User
 
Joined: Oct 2009
Posts: 2,736
Likes: 167
From: South West FL
Rtfm .............
Reply
Old Dec 6, 2012 | 06:25 PM
  #6  
B30CBLUE's Avatar
B30CBLUE
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 4
Likes: 0
From: so.indiana
ok have a copy of the service manual. printed the page to reset after removing negative terminal wait one minute reattach turn ignition swith ON. windows wont power down but the drivers does. start car than shut off and they all work for about a minute. what am i missing. drivers works anytime runnung or not. thanks for your help
Reply
Old Dec 6, 2012 | 08:44 PM
  #7  
Rad_Slinger's Avatar
Rad_Slinger
Registered User
iTrader: (12)
 
Joined: Dec 2011
Posts: 2,978
Likes: 83
From: New England
bring the car back to the dealership.....it's defective
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Amaadkhan2k
Audio, Video & Electronics
4
Oct 4, 2024 01:20 PM
reachout
General Tech Questions
38
Jun 27, 2020 12:35 AM
SuicidalG37SGuy
Engine, Drivetrain & Forced-Induction
8
Sep 10, 2015 06:01 AM
slawek65
G37 Coupe
4
Sep 8, 2015 09:07 AM
ZachThomas
Newbie Corner
2
Sep 3, 2015 01:40 PM




All times are GMT -4. The time now is 09:29 AM.