also is that a good brand to buy? How reliable is it?

 

Pigtails is all you would need, I cant speak on the brand as i have no knowledge on them, but it seems that's the route most of us is taking.

 

Dude, the pigtails link that was posted from eBay is $8. Buy it and be done with it. It's a wiring harness, why is the brand important? I bought it and I'll expect it to get the job done.

 

@@

why is it that, when i go to the local dealer and ask about the front bumper, I asked for the 2011 infiniti g37 IPL, but they couldnt find it. So i walk around the lot and saw a 2012 IPL that i took the VIN number and give it to them. They then told me that its $1600+.

Then, i went back to my car, called infinitiparts and ask them the same thing, and they told me there's only $1600+ too. The $300+ are just the normal bumpers.

Am i asking the wrong things??

 

yea you want the aero bumper. Same as IPL but IPL cost more because of their "limited" paint.

 

Does anyone have a DIY for installing the foglights? I ended up buying the Sentra fogs that came w/a wiring harness. I got the fogs onto the bumper and the switch into the dash but i don't know how to connect the two and where to plug things in.

 

but then, i dont think everyone here spent that $1600+ for that bumper.

 

Anybody think I can fit my Aero bumper in my coupe somehow? I need to transport it for install, but am curious to see if it can fit. My preliminary guess is no way. Anybody try?

 

There was a post w/ a couple pics buried way back early in this chain I think of somebody that managed it. You'll have to take it out of the box and shimmy it in somehow with one end sticking out the sunroof... If I find it I'll post it.

Edit: Found it.

 

Here

 

Wow. Thanks for the link Nukee. So it can be done! I'll try this tomorrow morning.

 

Yes, I wrote one:

https://www.myg37.com/forums/d-i-y-i...rt-bumper.html





.

 

Apparently I'm not good w/electrical work. I bought the Sentra foglights and it doesn't seem like the wire harness will work on our car (wishful thinking). How are people splicing into the current fog wires? When I look down behind the headlight the plug looks like there's 8 wires connected into it. Are people unplugging it and splicing there or elsewhere?

 

Just cut the 2 wires in the blue circle and connect them to a pigtails you purchased for the foglight on the bumper.

 

Do I still need to purchase pigtails if it came w/a wire harness and switch? It just seems like too much trouble trying to find a route all the way into the cabin so I think I just want to use the OEM fog switch.