vled slim ballast hid fogs
Thread Starter
Registered Member
iTrader: (4)
Joined: Feb 2006
Posts: 1,925
Likes: 27
From: baltimore
vled slim ballast hid fogs
installed the fogs last weekend and the 6000k vled h1 fogs are bluer than my hp auto 6000k headlight bulbs. what's everyone else using for headlights bulbs and are they any closer in color temp? also, i aimed the fogs down pretty low to keep the glare off other drivers...funny thing now though, when i turn the fogs on, the laser alert goes off on my v1.
installed the fogs last weekend and the 6000k vled h1 fogs are bluer than my hp auto 6000k headlight bulbs. what's everyone else using for headlights bulbs and are they any closer in color temp? also, i aimed the fogs down pretty low to keep the glare off other drivers...funny thing now though, when i turn the fogs on, the laser alert goes off on my v1.
Does the V1 stay alarming the whole time your fogs are on? Or is it when they are reflected off of something else?
I just bought the fogs as well and have yet to put them on.
the hpa bulbs are crap. I changed all my headlights and fogs out for DDM Tuning (HID Kits, BMW Aftermarket Bumpers & Lighting, DEPO - DDM Tuning) 6000K bulbs and they are perfect pure white and all match.
also, if your fogs are setting off the V1 alarm, they are WAY too low. readjust them using the DIY for adjusting lights to get them the correct height
also, if your fogs are setting off the V1 alarm, they are WAY too low. readjust them using the DIY for adjusting lights to get them the correct height
the hpa bulbs are crap. I changed all my headlights and fogs out for DDM Tuning (HID Kits, BMW Aftermarket Bumpers & Lighting, DEPO - DDM Tuning) 6000K bulbs and they are perfect pure white and all match.
also, if your fogs are setting off the V1 alarm, they are WAY too low. readjust them using the DIY for adjusting lights to get them the correct height
also, if your fogs are setting off the V1 alarm, they are WAY too low. readjust them using the DIY for adjusting lights to get them the correct height
can you direct me to the D2S bulbs they sell for our lowbeams.. i can NOT find them on ddm site..
HID Kits, BMW Aftermarket Bumpers & Lighting, DEPO - DDM Tuning
Just look under "HID replacement bulbs" then select D2S and your color temp
technically, the coupe uses 55W and the sedan uses 35W (so I bought the 55W) but either coupe/sedan will run fine off 35W. I just wanted to get the same wattage as the manual says
For your 2010 I would just check the manual to be sure
For your 2010 I would just check the manual to be sure
Trending Topics
My manual says 55 watts for the coupe. The sedans now have the fogs in the bumper. So if you have no problem with the 55 watt being too hot then that is what I think I should order. How long have you had them. The guy that answered the phone at DDM really was no help at all.
My manual says 55 watts for the coupe. The sedans now have the fogs in the bumper. So if you have no problem with the 55 watt being too hot then that is what I think I should order. How long have you had them. The guy that answered the phone at DDM really was no help at all.
absolutely no problems with overheating/burn out/etc
Haha no problem man...
HID Kits, BMW Aftermarket Bumpers & Lighting, DEPO - DDM Tuning
Just look under "HID replacement bulbs" then select D2S and your color temp
HID Kits, BMW Aftermarket Bumpers & Lighting, DEPO - DDM Tuning
Just look under "HID replacement bulbs" then select D2S and your color temp

Thread
Thread Starter
Forum
Replies
Last Post




