+1 on the G37 HQ.. he had 4 of us there last night tagging along with Alex when he got his Greddy exhaust installed hahaha

 

yes sir... you NEXT!

 

LOL!!! We'll see...

 

Just a quick question, was the mounting piece of metal for the spare tire sawed off? Cause the amps are sitting right on top of where that piece of metal should be sticking out of.

Nice sit up.

 

I am 99.9% sure this is the way I am going. I wanted to use my 2 12w3's, but there was no way. I used one and made a rack and was planning a floor above, but the room is eaten up. Even with only a 1 cu ft box.

I only differ in that I want to use 2 Dynaudio MW 190's in an IB setup, but we are not sure about the fit on the baffle board. Have to definitively measure it out and make sure before I order and drop the coin. If not, ID was going to be my next choice, although I have heard they are not like they use to be in the good old days.

How do those two subs behave with such a small trunk enclosure colume? i don't know what the Fs is of those, but this is also a concern with the 190's. The fact that I have 2 Zapco 650's at 32+ in does not help either! lol

Might be calling you for some feedback on your amp rack layout.

 

Thats Creation. Bz Masterpiece!!!!

 

nope. We built a platform on top of it to hold the amps.

give me a call if you want your done

thanks
Lou
(323)881-0882
amplifiedmotorsport.com

 

I beg to differ on the IDQ V3 is as good or better than the old ID'S. are you talking about the DC REF. 650? or the REF 650? This was a customers car but i used 2 DC REF AMPS 750.2 and 1000.4 on mine, basically identical setup as the pictures above. I had to cut a portion of the plasctic pc on the passenger side to make them fit.

 

Actually it is one AG650 I had and a Ref 650. I took out those plastic pieces and will be creating a whole new floor. Also have a DSP6 and will have an SLB-U since I prefer to keep gains as low as possible so, I want as much voltage as possible.

Never heard the IDQ's V3 so I can't comment, but I might have to try and find an IB setup with them. Hopefully I will be able to fit the 190's in because the 182's kick some serious midbass azz!

 

I haven't done any setup with the 190's so i really can't compare them. I setup the trunk baffle for sq. Gains down on the dsp level at -11 phased -180. Wanted enough bass to just to fill the proper sound stage set up. Im sure the 190's are great but IDQ's are enough for what i need it for. SQ

I'm trying to get some morel ultimo to test on TB/IB to test

 

Will you do similar installs w/ other subs that are not part of your "Authorized Dealer" selection?

I am really interested in this set up, but I am not too familiar with those speaker brands that you guys carry.

Would you guys do install and just charge for labor if the items were provided?

Thanks in advance.

 

what speakers do you have? and what amp?

 

JL12w7
Precision Power Amp currently, but thinking about getting a different one for this set up.

 

call me