New wheels offset and fitment
#1
New wheels offset and fitment
Hey guys, Im planning on getting new wheels and I need opinions and help with the proper offset for flush and aggresive fitment. Looking to get 19’s
I am on tein H tech lowering springs, 1.25 inch drop in the back and 1.5 inch in the front. I have no camber besides the camber that comes factory. If anyone is lowered and has specs on their fitment, please help a brother out and send pics for examples. Please and thank you
I am on tein H tech lowering springs, 1.25 inch drop in the back and 1.5 inch in the front. I have no camber besides the camber that comes factory. If anyone is lowered and has specs on their fitment, please help a brother out and send pics for examples. Please and thank you
Last edited by Pimpani; 03-01-2018 at 11:04 AM.
#2
Registered Member
iTrader: (3)
9.5 +35 and 10.5+37 is considered the conservative safe offsets to go. Whether 19/20".
Running 245s/275s with the above is fine.
--your lowered so your car is probably -1.5 to -2degrees camber (unless you got an alignment to bring it to -1, then my info would be useless. Other than the +35/37)
which is sufficient for like a 9.5 +25 / 10.5 +25 or +30. Running 245s/275s..
Running 245s/275s with the above is fine.
--your lowered so your car is probably -1.5 to -2degrees camber (unless you got an alignment to bring it to -1, then my info would be useless. Other than the +35/37)
which is sufficient for like a 9.5 +25 / 10.5 +25 or +30. Running 245s/275s..
Thread
Thread Starter
Forum
Replies
Last Post