I have searched and searched, it looks like most people run 20" RC7s, anyone run 19"?

I am specifically looking to see the concavity of the 9.5" and 8.5" 19" wheels.

 

I'd contact Rohana and see if they have pics of the exact wheels/offset that you're wanting. They should be able to help w/ that. Might also contact GetYourWheels (Jason or Josh) for specific info as they sell a lot of those wheels. I looked around and many shots that said 19s were still 20s
Here's some ebay listings but look to be 20s
19" ROHANA RC7 SILVER CONCAVE WHEELS RIMS FITS INFINITI G35 COUPE | eBay
This BMW looks like a 19 set but???

 

Thanks blnewt! Unfortunately I have contacted 2 sellers (not from here) and Rohana..... nobody can take pics

 

19x8.5 and 19x9.5

You'll have a flat face on the 8.5 and a semi concave on the 9.5

 

The way the design of the wheel is, as long as you don't have Akebono brake calipers for the front, you'll be fine. The inner barrel where the valve stems seats is inset on these wheels so the inner barrel is more like an 18".

 

That is exactly what I wanted to see! Sadly (for the wheels), I have Akebono brakes. Guess that is why so many get 20".

 

Do you carry any 19" super concave wheels (in the same price range as RC7s) that clear the Akebono brakes?

 

you trying to stay within fender?

also, coupe or sedan?

 

Would like them flush as possible but I run in-spec camber and do not want to modify the fenders. (trimming the lining and bumper bolt would be ok though).

I have a 2012 Sedan, lowered on coils.

 

Wedssport 19s come to mind And they have 18s (which I'm running) that easily clear BBK and are deep concave. They are made in Japan for top quality, are lighter weight, and best of all, don't cost a mint (most of them anyway).
WedsSport Wheels

 

The styles I like only go up to 18" Which ones are you running?

 

^ this.

There are other options too but you don't get much concavity when you need a high offset wheel with the given width.

 

Just looking for the most concavity..... and would love a W I D E wheel.

Looks like I may need to go 20" RC7.

 

Check out Forgestar.

They have F14 in 19x10 or 19x11 that can do high offset in the Super Deep Concave profile for the rear and do a 19x9 in the front with the semi concave profile.

 

Forgestars would be a good option, especially if you're set on 19s.

Here's the post from GetYourWheels Wedssport thread~
https://www.myg37.com/forums/wheels-...ml#post4036567

And a pic from the side, what I like is these wheels look bigger than 18s w/ the brushed spokes that go all the way through the barrels and the brushed outline at the wheels edge.