I'm planning on getting the vmr v710's in 19x9.5 +22 all around. I've been researching and found that they should fit fine without any issues. My car is lowered on coils. As for the tire, I don't know what size to get. Anyone know an ideal size for a flush fit?

 

Those aggressive offsets will insure a flush fit, you'll have to run a slight stretch IMO to keep from rubbing the inner front fender and if you want the same size all around 245/40/19 would be OK, you still might have to roll the front fenders though depending how low you drop your coils.

 

I'm lowered about 1.5" right now. Would the rears be flush with that offset?

 

In for pics, although the drop will probably be too low...

 

Current height

 

On second thought, I might get staggered 8.5 fronts cuz newt said I would possibly need a fender roll..it's just cause I was thinking about rotating them.

 

Here's the VMRs on a sedan, and these are 19x10 +25 running stretched 235/35/19s according to this post
https://www.myg37.com/forums/3479033-post1.html
those are pretty narrow sidewalls for the X.


Here's a thread w/ 9.5" +33 but had to be redrilled for proper bolt pattern
https://www.myg37.com/forums/private...tml?styleid=50
The VMRs are a nice looking wheel, they just don't come in a range of offsets in the Infiniti bolt pattern. If you want an easier fit you might try
a different brand wheel.
This would be an option for a square 9.5" setup w/ +40 offset
https://www.myg37.com/forums/3535854-post1.html
More options
https://www.myg37.com/forums/wheel-a...bers-only.html
You get the idea, check the wheel vendor pages for countless others
Wheel & Tires - MyG37

 

Ooo, thanks a lot blnewt

 

Hmm not bad... I'm not one for the tucked look. I like an even drop with flush wheels. That should look just about even with the right set of wheels.. Now go get em!