Help TSW Nurburgring square setup
TSW Nurburgring square setup
Hello guys,
I did lots of searches on both this site and other sites along with compared the offsets with offset calculators on 1010tires and rimsntires but I would like to confirm with you guys for this specific setup. I am interested in ordering a square setup for my 2010 G37X Silver. I need your help to determine if the following will work: I was thinking of TSW Nurburgring Matte Gunmetal 19X9 with a 32 offset on all 4 corners. I would like to know how flush the fronts and the back will be. I am not planning on dropping the car in the near future and even if I do I will drop it 1.5" max. Also, will these fit over Akebono big brakes? Can you recommend a tire size too?
Thank you very much for your help,
Stephane
I did lots of searches on both this site and other sites along with compared the offsets with offset calculators on 1010tires and rimsntires but I would like to confirm with you guys for this specific setup. I am interested in ordering a square setup for my 2010 G37X Silver. I need your help to determine if the following will work: I was thinking of TSW Nurburgring Matte Gunmetal 19X9 with a 32 offset on all 4 corners. I would like to know how flush the fronts and the back will be. I am not planning on dropping the car in the near future and even if I do I will drop it 1.5" max. Also, will these fit over Akebono big brakes? Can you recommend a tire size too?
Thank you very much for your help,
Stephane
Hello guys,
I did lots of searches on both this site and other sites along with compared the offsets with offset calculators on 1010tires and rimsntires but I would like to confirm with you guys for this specific setup. I am interested in ordering a square setup for my 2010 G37X Silver. I need your help to determine if the following will work: I was thinking of TSW Nurburgring Matte Gunmetal 19X9 with a 32 offset on all 4 corners. I would like to know how flush the fronts and the back will be. I am not planning on dropping the car in the near future and even if I do I will drop it 1.5" max. Also, will these fit over Akebono big brakes? Can you recommend a tire size too?
Thank you very much for your help,
Stephane
I did lots of searches on both this site and other sites along with compared the offsets with offset calculators on 1010tires and rimsntires but I would like to confirm with you guys for this specific setup. I am interested in ordering a square setup for my 2010 G37X Silver. I need your help to determine if the following will work: I was thinking of TSW Nurburgring Matte Gunmetal 19X9 with a 32 offset on all 4 corners. I would like to know how flush the fronts and the back will be. I am not planning on dropping the car in the near future and even if I do I will drop it 1.5" max. Also, will these fit over Akebono big brakes? Can you recommend a tire size too?
Thank you very much for your help,
Stephane
Here's a good example of a 20x9 square setup running 245/35/20s all around, I believe his offset is like +35, I think this would be a good fit for your X, but in 19s w/ proper tires being 245/40/19 for that setup
https://www.myg37.com/forums/g37-sed...-thread-2.html
You could also go w/ Ace Mesh 7 wheels in 8.5" (+40) 245/40/19s and I know you mentioned square but they also have a good staggered combo (just in case you can be persuaded, lol) For the staggered set you'd want 245/40/19 front (+40) 285/35/19 rear (+45)
http://www.elementwheels.com/products.asp?cat=4507
https://www.myg37.com/forums/g37-sed...-thread-2.html
You could also go w/ Ace Mesh 7 wheels in 8.5" (+40) 245/40/19s and I know you mentioned square but they also have a good staggered combo (just in case you can be persuaded, lol) For the staggered set you'd want 245/40/19 front (+40) 285/35/19 rear (+45)
http://www.elementwheels.com/products.asp?cat=4507
Last edited by blnewt; Jan 2, 2014 at 11:15 PM.
Thread
Thread Starter
Forum
Replies
Last Post
blnewt
D.I.Y. Installations/Modifications
37
Oct 17, 2020 11:12 AM
4DRZ
Wheels & Tires
13
Oct 14, 2015 01:51 PM



