Anyone running 19" stance sc5

Thread Tools
 
Search this Thread
 
Old May 23, 2013 | 07:35 AM
  #1  
jesse550's Avatar
jesse550
Thread Starter
Registered User
 
Joined: Dec 2011
Posts: 921
Likes: 10
Anyone running 19" stance sc5

Anyone? Seems like everyone's running the 20's.

From the pics I have seen, they look kinda small in the silver/machined finishes. Trying to see if anyone else has them.
Reply
Old May 23, 2013 | 09:01 AM
  #2  
BLAIR'N G372012's Avatar
BLAIR'N G372012
Registered User
 
Joined: Mar 2013
Posts: 356
Likes: 36
Jesse... I've seen both the 20's and 19's yet had a different set from Stance before... the outer lip is polished out nice... the biggest problem I had was keeping them "Clean" the gap betweenthe lip and the blades are a huge dirt collector yet too if its a Matt blk powder coat that some have collects dust like bad... the finish on the blades are good...not great but good... the center cap is plastic ... it will start yellowing after a short time...my guess heat?
But just my. 02¢ tires are way WAY Cheaper for 20's than 19's... 20'are just more common yet sizes ...
Reply
Old May 23, 2013 | 09:06 AM
  #3  
Topher9425's Avatar
Topher9425
Premier Member
iTrader: (40)
 
Joined: Mar 2011
Posts: 2,807
Likes: 122
From: Orlando
Ive got a set of 20" SC-5ives......no issues here
Reply
Old May 23, 2013 | 09:16 AM
  #4  
jesse550's Avatar
jesse550
Thread Starter
Registered User
 
Joined: Dec 2011
Posts: 921
Likes: 10
Thanks guys, biggest problem was that I just bought new tires for my 19's not too long ago and I'm thinking of getting new wheels this summer. I was just afraid the 19s might look a bit too small on the G.

Most likely thinking of combining them with an eibach drop.

Blair, did you see the 19s in person? If so, did the they look oddly small to you? I can't tell if it's because I'm conditioned to seeing all these pictures of 20 inch vossens and stance wheels but the 19s seem like they're just a bit too small to flow with the car.
Reply
Old May 23, 2013 | 09:32 AM
  #5  
farmurr's Avatar
farmurr
Registered User
 
Joined: Jan 2013
Posts: 189
Likes: 16
From: Toronto, ON
Originally Posted by jesse550
Thanks guys, biggest problem was that I just bought new tires for my 19's not too long ago and I'm thinking of getting new wheels this summer. I was just afraid the 19s might look a bit too small on the G.

Most likely thinking of combining them with an eibach drop.

Blair, did you see the 19s in person? If so, did the they look oddly small to you? I can't tell if it's because I'm conditioned to seeing all these pictures of 20 inch vossens and stance wheels but the 19s seem like they're just a bit too small to flow with the car.
I'm running 19x8.5 vossens, and while they don't look "small" on the car imho, they certainly won't have the same concave effect as deeper 20s.
Reply
Old May 23, 2013 | 09:34 AM
  #6  
jesse550's Avatar
jesse550
Thread Starter
Registered User
 
Joined: Dec 2011
Posts: 921
Likes: 10
Originally Posted by farmurr
I'm running 19x8.5 vossens, and while they don't look "small" on the car imho, they certainly won't have the same concave effect as deeper 20s.
I do think the 19 inch vossens look good, only thing I was worried about was the lip on the stance, I feel like it makes the wheels look a bit smaller than they are.
Reply
Old May 23, 2013 | 01:16 PM
  #7  
Topher9425's Avatar
Topher9425
Premier Member
iTrader: (40)
 
Joined: Mar 2011
Posts: 2,807
Likes: 122
From: Orlando
Originally Posted by jesse550
I do think the 19 inch vossens look good, only thing I was worried about was the lip on the stance, I feel like it makes the wheels look a bit smaller than they are.
Any wheel with a lip is going to appear to be smaller.....then a wheel where the spokes/mesh/etc meet the edge of the wheel. Take for example Vossen CV3 -vs- Stance SC-5ives
Reply
Old May 23, 2013 | 01:18 PM
  #8  
jesse550's Avatar
jesse550
Thread Starter
Registered User
 
Joined: Dec 2011
Posts: 921
Likes: 10
Originally Posted by Topher9425
Any wheel with a lip is going to appear to be smaller.....then a wheel where the spokes/mesh/etc meet the edge of the wheel. Take for example Vossen CV3 -vs- Stance SC-5ives
I figured, trying to find some pictures of G's with 19 inch stance sc-5s to see if it's something I could settle with. The black ones look okay in 19s but I think the machined finish is going to look a bit small.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vamarris
Engine, Drivetrain & Forced-Induction
3
Dec 9, 2018 11:10 AM
conkus805
ECU Tuning / Dyno Data
46
Nov 19, 2015 07:49 PM
delfinparis
Audio, Video & Electronics
2
Nov 16, 2015 02:26 PM
bobtaz13
Wheels & Tires
1
Oct 1, 2015 01:39 PM




All times are GMT -4. The time now is 06:32 PM.