Sup guys, Im gettin rid of my 20's and going back to stock... would 15mm in the front and rear look flush with no rubbing on stock 18" rims for the 08' journey???


any pics? i cant find anything!

 

I'd just put them back on and measure exactly what you want. Depends how much you're dropped, if you're dropped pretty low in front and go flush you'll rub the underfender clips. Running a week without spacers is no big deal to make sure you get exactly the spacing you need IMO.

 

Depends how much you're dropped.....if you're staying dropped.

I have 20mm all around and I'm slightly tucked at -1.8 camber.

Again......bl said it best....just measure what you want then do the conversion to mm and you'll probably be able to get something close.

 

not looking for negative camber... kinda hard to measure as well.. just wanted to know from the experiences of members

im thinking 15mm all around on stock 18's should be fine????

 

You're gonna get negative camber if you're dropped and have spacers...UNLESS you have aftermarket camber arms. It's unavoidable.

 

I went with 20mm all around for a flush look

 

^post some pics when you have everything installed!!

 

i don't want negative camber at all... would 10mm all around with stock 18's work??

 

You still haven't said if you're dropped or not, that will make a huge difference.
It's easy to measure once you get your 18s on, just put a straight edge up your tire and measure the distance in mm from the inside of the straight edge to the inside of your fender well (with a couple mm for insurance).
If you've got a aggressive drop you might want to come in an additional 5mm in front to avoid hitting those bumper clips.

 

You don't want *excess* negative camber, but you will want to have some camber on there to achieve some type of performance out of the suspension. Anything within the specified range is good.

Remember, even at 0 static camber, when the suspension compresses, you will get camber.

 

ill kw coilovers... and don't want "excess" camber! thinking that 10mm all around will work on stock 18's?

 

If you are still looking for spacers send me a pm. I'll hook you up with a set. I need a few pics on a G37 with a set of our spacers.