Help 20/25mm spacers with G37S coupe OEM wheels??

Old Mar 24, 2012 | 03:49 PM
  #1  
Bong1012's Avatar
Bong1012
Thread Starter
Registered User
iTrader: (3)
 
Joined: Aug 2010
Posts: 270
Likes: 2
20/25mm spacers with G37S coupe OEM wheels??

Hi,

Does anyone have pictures of their G37 Coupe with 20mm or 25mm spacers with SPORT oem wheels?

Front: 19x8.5 Offset +43

Rear: 19x9 Offset +45

I'm planning to use front tires 245/40R20 and rear tires 275/40R20.

Please let me know if this setup will work. My bumper/fender bracket has been removed.
Reply
Old Mar 29, 2012 | 12:18 AM
  #2  
BlueOut's Avatar
BlueOut
Banned
iTrader: (12)
 
Joined: Sep 2011
Posts: 387
Likes: 0
From: VIRGINIA
Yea it'll worlk, r u lowered on anything? Eibach you'll be fine but if your slammed to the grind then 25 mm will be to big, I'd go with 20mm all around I've seen it it looks clean and flush with the fender
Reply
Old Mar 29, 2012 | 12:32 AM
  #3  
TVPostSound's Avatar
TVPostSound
Registered Member
iTrader: (9)
 
Joined: May 2010
Posts: 3,613
Likes: 117
From: Granada Hills, CA
245s on the front 275 on the rear.

20mm on the front, 15mm on the rear.
No its not a typo!!

You increased the rears by 30mm with 275s, 15mm in and out.
you increased the fronts by 20mm on the fronts, 10 mm in and out.
So you actually increased your track by 5 more mm in the rear, by going 15mm spacers in the rear, and 20mm in the front,
the track stays even front to rear.


Also 20mm on the rear makes the tire stick out, Im set to factory specs
on camber.
IMG_0159.jpg?t=1330813085

Last edited by TVPostSound; Mar 29, 2012 at 12:38 AM.
Reply
Old May 10, 2013 | 04:37 PM
  #4  
g37nnj's Avatar
g37nnj
Registered User
iTrader: (1)
 
Joined: May 2012
Posts: 35
Likes: 0
From: NJ
Sorry to bump this thread, but it looks like your car is lowered, does that mean these settings will work when on Eibach pro kit sprinss, as well? (ie 20mm/15mm)? Do you have any rubbing issues? (Im runing 245/275s already)
Reply
Old May 11, 2013 | 02:59 AM
  #5  
TwoThree's Avatar
TwoThree
Registered User
iTrader: (4)
 
Joined: Dec 2011
Posts: 1,430
Likes: 51
From: Florida
Originally Posted by g37nnj
Sorry to bump this thread, but it looks like your car is lowered, does that mean these settings will work when on Eibach pro kit sprinss, as well? (ie 20mm/15mm)? Do you have any rubbing issues? (Im runing 245/275s already)
TVPost is dropped on Swifts which is very close to the drop on Eibachs. And I'm pretty sure he has no issues as far as rubbing goes last I talked to him about it. He's a tad lower in the rear in that picture due to cut rear spring perches. It's about .5" lower than just installing the springs.
Reply
Old May 30, 2013 | 06:22 AM
  #6  
g37nightrider's Avatar
g37nightrider
Registered User
 
Joined: May 2013
Posts: 32
Likes: 4
Smile

Originally Posted by TVPostSound
245s on the front 275 on the rear.

20mm on the front, 15mm on the rear.
No its not a typo!!

You increased the rears by 30mm with 275s, 15mm in and out.
you increased the fronts by 20mm on the fronts, 10 mm in and out.
So you actually increased your track by 5 more mm in the rear, by going 15mm spacers in the rear, and 20mm in the front,
the track stays even front to rear.


Also 20mm on the rear makes the tire stick out, Im set to factory specs
on camber.
This is perfect for what I'm looking for. Any other specs outside of tires and spacers?How is ride comfort on the swifts? Any rub or vibration? Verrry clean!
Reply
Old May 30, 2013 | 10:01 AM
  #7  
TVPostSound's Avatar
TVPostSound
Registered Member
iTrader: (9)
 
Joined: May 2010
Posts: 3,613
Likes: 117
From: Granada Hills, CA
Originally Posted by TwoThree
TVPost is dropped on Swifts which is very close to the drop on Eibachs. And I'm pretty sure he has no issues as far as rubbing goes last I talked to him about it. He's a tad lower in the rear in that picture due to cut rear spring perches. It's about .5" lower than just installing the springs.
That picture is with Swifts, stock uncut perches!!
20MM in front 15MM in rear, 245 front, 275 rear.

Tried again with 20MM in the rear, but rubbed, even with trimmed bumper bracket, back to 15MM in rear!!
Reply
Old May 30, 2013 | 02:14 PM
  #8  
g37nightrider's Avatar
g37nightrider
Registered User
 
Joined: May 2013
Posts: 32
Likes: 4
What are stock perches? what would it look like with cut stock perches? sorry guys.
Reply
Old Jun 1, 2013 | 06:39 PM
  #9  
xsaqzw's Avatar
xsaqzw
Registered User
 
Joined: May 2012
Posts: 66
Likes: 0
From: Spartanburg, SC
Looks nice! I just got Tein S-techs and the rear SPC camber kit and toe bolts. Will be installing at the end of June. Will 20mm front and 15mm rear with 245/275s fit as well?
Reply
Old Jun 2, 2013 | 01:20 PM
  #10  
g37nightrider's Avatar
g37nightrider
Registered User
 
Joined: May 2013
Posts: 32
Likes: 4
Originally Posted by xsaqzw
Looks nice! I just got Tein S-techs and the rear SPC camber kit and toe bolts. Will be installing at the end of June. Will 20mm front and 15mm rear with 245/275s fit as well?
Yeah that's what TV has for his set up, so it should work. Look at the beginning of the thread he has it specified.
Reply
Old Jun 23, 2013 | 10:41 PM
  #11  
g37nightrider's Avatar
g37nightrider
Registered User
 
Joined: May 2013
Posts: 32
Likes: 4
Thanks TVsound for the tips, ended up adding Swift Springs and the 15mm rear and 20mm front spacers. check it out.
Attached Thumbnails 20/25mm spacers with G37S coupe OEM wheels??-2013-06-22-20.14.09.jpg   20/25mm spacers with G37S coupe OEM wheels??-2013-06-19-17.10.25.jpg   20/25mm spacers with G37S coupe OEM wheels??-2013-06-19-15.52.01.jpg  
Reply
Old Jun 23, 2013 | 11:35 PM
  #12  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,876
Likes: 4,950
Originally Posted by g37nightrider
Thanks TVsound for the tips, ended up adding Swift Springs and the 15mm rear and 20mm front spacers. check it out.
Looking nice Looks like an even drop that should be pretty easy to live w/ on a daily driver, thanks for the pics.
Nice wheel/spacer fit too.
Reply
Old Oct 4, 2013 | 12:25 AM
  #13  
Gthang74's Avatar
Gthang74
Registered User
 
Joined: Jan 2012
Posts: 9
Likes: 0
Its gonna so flush.mine got 25mm all around on stock wheels.
Reply
Old Oct 23, 2013 | 11:37 AM
  #14  
randyg37s's Avatar
randyg37s
Registered User
iTrader: (1)
 
Joined: Jul 2013
Posts: 116
Likes: 13
From: Miami Fl
Originally Posted by TVPostSound
245s on the front 275 on the rear.

20mm on the front, 15mm on the rear.
No its not a typo!!

You increased the rears by 30mm with 275s, 15mm in and out.
you increased the fronts by 20mm on the fronts, 10 mm in and out.
So you actually increased your track by 5 more mm in the rear, by going 15mm spacers in the rear, and 20mm in the front,
the track stays even front to rear.


Also 20mm on the rear makes the tire stick out, Im set to factory specs
on camber.
hey bro i need some help. im dropping the g on kws next week i have a g37s coupe 2010 with oem wheels and tires. I want to put spacers to get a bit more aggressive stance until i get other wheels. should i go 15mm all around or 15f 20r? and with no rub lol thanks in advance
Reply
Old Oct 23, 2013 | 02:45 PM
  #15  
Rad_Slinger's Avatar
Rad_Slinger
Registered User
iTrader: (12)
 
Joined: Dec 2011
Posts: 2,978
Likes: 83
From: New England
I put 20mm all around. Pics are in my profile if you want to see. Dropped on Tanabe So-C coils.
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:52 AM.