Anyone have pictures of 19" cv1's on a G37 sedan?

 

 

Hi Diego,

my VFS-2 Wheels will be there next week.
I ordered them in the same spec as you drive.

What tire size should i drive?
245/35/20 and 275/30/20 ?

Whould 235/30/20 and 265/30/20 whould be also possible?!

Greets from Germany ;-)

 

Congrats! You got 20x9.5 +25 and 20x10.5 +45 correct? If yes, I would recommend 245/35/20 and 285/30/20.
235/265 will be too thin for this setup.

 

Thanks man
i have now 245/35/20 and 275/30/20

hope me wheels will come this week -.-

 

Hi Diego,

Did you install camber kits at both front and rear suspensions?

With this offsets, F +25, did you have to bend your front fender because I think the wheels will stick out a lot?

Also, with the R +45, do your rear wheels rub against the strut housing?


Thanks,

 

I just aligned my car last week. I only have the SPC rear camber kit and I am sitting at -1.9 rear with -2.6 front (No Camber Kit) My drive height is pretty low so these numbers are not bad at all.

With the rear 20x10.5 +45 it's perfect with no issues on the G coupe or sedan, this is our recommended fitment. The front 20x9.5 +25 sits very very nice and with a 255/30/20 there is absolutely no rubbing issues with either coupe or sedan and you get that deeper concave we all love.

 

 

 

Nothing new but wanted to share my Vossen setup!

Gunmetal CV3's
20x10.5 offset 45 all around
Nexen N7000 275/30/20

 

20X9 +38 Vossen 084's all around. I just could't get into the concave look.

 

Sup Diego! I bit the bullet and went with the cv5 10.5 +25 255/30/20 all around. I'll Prolly be 25-26 inches to the ground. Won't roll the fenders, but I will shave the rear bumper bracket. Now, I need your help in suspension.

What coilovers do you recommend and setup/specs. Also, do I need a toe arm and etc??

Thanks D! Can't wait to finish my project!!

 

Congrats on the CV5's, sometimes I really miss those lol. What's your budget on suspension? There are a lot of great choices...RSR, KWV3 etc. I personally loved the KWV3 coilovers but they are not cheap. I would advise to get the SPC rear camber kit at least. Front would also be a good idea if you can swing the extra cash but rear is inexpensive and a must in my opinion.

 

My budget is $1,200 on coilovers alone. What's your top 3 coilovers within that budget??

What's your opinion on BC, powertrix, stance coilovers??

Does having "true" coilovers really matter??

Yeah KWV3 are way out of my budget lol

 

BC isn't bad. I know a few with K-Sport and I previously had the Stance GR Coils. As for differences the only thing I noticed in a true setup is they were very easy to adjust height on rear and you will have the ability to removed the spring bucket and add an SPL toe arm instead. Between the 3 I would personally go with BC for the $$