I would recommend this over mine for a +25/25 10.5 all around with 265/30/20 tires.

 

Here is m ore of my setup in this video.

 

You got a PM btw...

 

Alway's i will recommend the following over anything else to avoid fender mods/rubbing/trimming etc.

Staggered 20x9.0/20x10.5 for Both Coupe & Sedan

+32/45

245/35/20 & 285/30/20

Want a little more flush? We do have the +20/25 but never will recommend for the sedan, coupe can run it but rear will need a 255/30 or 265/30/20 tire or if you want 275s only very few brands like Toyo T1R and FAlken 452 have worked. Nitto 555 was too fat and so was Invos and Hankook, unless you want to run negative camber and remove rear fender bracket this is whats needed.

+25/25 all around in 20x10.5 have worked with either the same 255/30/20 or 265/30/20 of your choice but again not all are willing to go this route.

20x10.5 +15 all around i had most issues with and unless you know what you are doing and don't mind the following do at your own risk as i will never recommend this route for any customer.

I started with +15s and attempted 265/30s and couldnt even drive, i had to raise front more than i wanted to be able to turn and rear same tire was laying on fender and i was not about to run excessive camber as this is my DD. I swapped out tires for 255/30/20 and rolled front fenders and slammed the car to where it is now and absolutely no issues even driving from Miami to Daytona hauling *** lol. Best setup by far but 255/30/rolled front fenders and -2.6/2.8 camber was needed to keep everything perfect to my everyday needs.

 

Great info as always man. Thanks! So would these recommendations work on other wheels as well or are they just Vossen specific?

 

These bad boys just came in today, can't wait to mount them!!

 

^^lets see how long u wanna keep these lol

 

Good choice man! Can't wait to see your ride with these on it!

 

Sik wheels, when is the mounting going down?

 

Lol buddy I love these. Only wheel now that can take me away would be a gunmetal vps wheel and so far I still like these better than any new designs I've seen :0

 

Very sweet wheels, i am tempted to try them before the VPS but may hold off. Post pics when mounted

 

 

i have vossen CV3 20 in and I'm running 285/30/20 in the rear and I'm scraping against the fender . Please send me some advice on what to do.

 

Email me with any questions or concerns.

 

Here is Eibach Springs and VVS-CV5s 20x10.5 | +25/25 | Dunlop 265/30/20s on all 4 corners.