Noooberoni wheel question...

Old May 12, 2009 | 02:45 PM
  #1  
jarborn1's Avatar
jarborn1
Thread Starter
Registered User
iTrader: (5)
 
Joined: Aug 2008
Posts: 2,343
Likes: 2
From: New York
Noooberoni wheel question...

No way can i do 305's....

But i am deciding between 275 and 285 rears...

I have eibach's so i would prefer the wheel with the higest wall to minimize any remaining fender gap??

Suggestions on tires also... Got a good quote on Yokohoma S Drives, and Toyo T1r's...
Reply
Old May 12, 2009 | 02:46 PM
  #2  
xlack's Avatar
xlack
Registered Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 4,333
Likes: 2
From: Singapore
u did not mention what wheels u got
Reply
Old May 12, 2009 | 02:55 PM
  #3  
jarborn1's Avatar
jarborn1
Thread Starter
Registered User
iTrader: (5)
 
Joined: Aug 2008
Posts: 2,343
Likes: 2
From: New York
Something NOBODY on this forum seems to know about...













Vossens..084's with black lip..(From PFizzle)
Reply
Old May 12, 2009 | 03:02 PM
  #4  
xlack's Avatar
xlack
Registered Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 4,333
Likes: 2
From: Singapore
^ oh i remember now..
Reply
Old May 12, 2009 | 03:03 PM
  #5  
Stanced370Z's Avatar
Stanced370Z
Registered User
 
Joined: Feb 2008
Posts: 721
Likes: 0
From: Miami Lakes, Florida
U can run 305's on the 084's. GO WITH WIDE RUBBER!!!! TRUST ME!
Reply
Old May 12, 2009 | 03:07 PM
  #6  
jarborn1's Avatar
jarborn1
Thread Starter
Registered User
iTrader: (5)
 
Joined: Aug 2008
Posts: 2,343
Likes: 2
From: New York
Originally Posted by Slammed37S
U can run 305's on the 084's. GO WITH WIDE RUBBER!!!! TRUST ME!

I know its possible and your's looks sick, but my concern is everyone running 305's is dropped on something lower then Eibach..

I dont want to have super skinny, wide *** tires with a gap... Y a dig?
Reply
Old May 12, 2009 | 03:10 PM
  #7  
Stanced370Z's Avatar
Stanced370Z
Registered User
 
Joined: Feb 2008
Posts: 721
Likes: 0
From: Miami Lakes, Florida
Yes I do sir, but you'll be fine with the 305's. They sit flush with the 10.5" wide wheels, and if you're unhappy with the wide look, just camber it in a bit and that should solve it. I'm pushing for it because it looks amazing. I'll never go back to 275 or 285.
Reply
Old May 12, 2009 | 03:12 PM
  #8  
jarborn1's Avatar
jarborn1
Thread Starter
Registered User
iTrader: (5)
 
Joined: Aug 2008
Posts: 2,343
Likes: 2
From: New York
Originally Posted by Slammed37S
Yes I do sir, but you'll be fine with the 305's. They sit flush with the 10.5" wide wheels, and if you're unhappy with the wide look, just camber it in a bit and that should solve it. I'm pushing for it because it looks amazing. I'll never go back to 275 or 285.

Yea maybe i will give it a shot..

Good thing i am up in NY, cause 084's with 305's on a PG...

Have I seen that before on here?
Reply
Old May 12, 2009 | 03:13 PM
  #9  
xlack's Avatar
xlack
Registered Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 4,333
Likes: 2
From: Singapore
Originally Posted by Slammed37S
Yes I do sir, but you'll be fine with the 305's. They sit flush with the 10.5" wide wheels, and if you're unhappy with the wide look, just camber it in a bit and that should solve it. I'm pushing for it because it looks amazing. I'll never go back to 275 or 285.
on a 10.5 wheel, what is the most aggressive offset u can go and not have rubbing issues with the 305?
Reply
Old May 12, 2009 | 04:13 PM
  #10  
Stanced370Z's Avatar
Stanced370Z
Registered User
 
Joined: Feb 2008
Posts: 721
Likes: 0
From: Miami Lakes, Florida
lmao if u were down here i'd sell my rims again and go custom with vossen to make sure no one has them. give it a shot bro.

And xlack right now I have a +42 offset in the rear and a 3mm spacer on top of that leaving it at +39. My camber is at -1.2 and I still have at least another 5mm or a little more of clearance. Next step will be 325's I have a feeling it might just fit with a little more negative camber.
Reply
Old May 12, 2009 | 06:20 PM
  #11  
jarborn1's Avatar
jarborn1
Thread Starter
Registered User
iTrader: (5)
 
Joined: Aug 2008
Posts: 2,343
Likes: 2
From: New York
So what is the thickest tire size??

Like from rim to wheel well...

Cause if the 305's are thick i will DEF get those...

Like i said i am a tire noob so i dont really know what those numbers all mean....

All i know is 305 is FIYA..
Reply
Old May 14, 2009 | 11:52 AM
  #12  
JKashat's Avatar
JKashat
Registered User
iTrader: (6)
 
Joined: Sep 2003
Posts: 1,000
Likes: 0
From: West Bloomfield, Michigan
Originally Posted by jarborn1
So what is the thickest tire size??

Like from rim to wheel well...

Cause if the 305's are thick i will DEF get those...

Like i said i am a tire noob so i dont really know what those numbers all mean....

All i know is 305 is FIYA..
There's 305/25 & 305/30's. Most people who are running 305's on G37's are using the 25 Series because of overall diameter. The widest tire is a 345...
Reply
Old May 14, 2009 | 01:09 PM
  #13  
jarborn1's Avatar
jarborn1
Thread Starter
Registered User
iTrader: (5)
 
Joined: Aug 2008
Posts: 2,343
Likes: 2
From: New York
Originally Posted by JKashat
There's 305/25 & 305/30's. Most people who are running 305's on G37's are using the 25 Series because of overall diameter. The widest tire is a 345...

Thanks man.. I am looking for THICKNESS..

I know 305's are wide but wide doesnt do me any good dropped on eibach if the tire's are very thin, it will accentuate the gap that is still left over..

Trying to avoid that
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
helloandchau
Private Classifieds
8
Oct 6, 2015 05:26 PM
Amrit.bhathal
Wheels & Tires
18
Sep 11, 2015 07:36 PM
xpcgamer
Wheels & Tires
1
Sep 7, 2015 07:10 PM
Sylo
Private Classifieds
0
Sep 3, 2015 04:44 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 04:41 AM.