When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Work Emotion ZR10 19x9.5/10.5 staggered set - NO TIRES
Category: Wheels & Tires Price: $1400 Private or Vendor Listing: Private Listing Part fits: 2010+ G37 Coupe, 2010+ G37 Sedan, 2008-2009 G37 Coupe, 2008-2009 G37 Sedan, Other Model G's Location (State/Prov): FL Item Condition: Used Tire/Wheel Type: 19
Selling my spare staggered set of Work Emotion ZR10 wheels, with tires mounted and balanced. Good condition overall, minor scratches on the lips from road rocks - no curb rash. Purchased new from Evasive Motorsports, lightly driven on for around 5k miles. Specs below. 3 sheets of Work Emotion wheel decals included (sorry, somehow lost one of the sheets but they can be purchased online if wanted). Located in SE Florida. Pickup only, not willing to ship.
For coupes: Must use aftermarket rear camber arms to avoid rubbing. Rear camber needs to be set to -2 degrees or lower and the rear fender liner tab must be trimmed, but this setup won’t rub with coilovers.
Work Emotion ZR10 Glim Black Diamond Cut Rim finish (GTKRC) 5x114.3
19x9.5 +23 front
19x10.5 +23 rear
*Work Emotion high-type center caps included
*Black Work RS aluminum lug nuts included (not pictured, sorry, they’re in storage)
*Work valve stems are included
*Authenticity papers are included *TPMS sensors are not included. Must purchase new sensors or swap if TPMS is desired.
Asking $1400 (no tires included)
Local pickup only
No low-ball offers please
Last edited by goldbug; Sep 9, 2024 at 09:31 AM.
Reason: Price drop
Hi, do these fit with stock IPL suspension, and will they rub? I appreciate any help you can provide.
Hi,
Yes they will fit, but they will poke pretty aggressively in the rears without lowering springs/coilovers and rear camber arms. They shouldn’t rub on stock IPL suspension, but might over bad dips in the road. Here is a picture below of how the rears poked on my coupe; 1st pic was taken right after I lowered the lift, before an alignment. 2nd pic was the next day after I let the coilovers settle back down and had an alignment done (-2.1 degrees rear camber). Hope that helps.
10.5+23 275/35 General Gmax RS (just lowered off of the lift, no alignment done yet) 10.5+23 275/35 general gmax RS
Yes they will fit, but they will poke pretty aggressively in the rears without lowering springs/coilovers and rear camber arms. They shouldn’t rub on stock IPL suspension, but might over bad dips in the road. Here is a picture below of how the rears poked on my coupe; 1st pic was taken right after I lowered the lift, before an alignment. 2nd pic was the next day after I let the coilovers settle back down and had an alignment done (-2.1 degrees rear camber). Hope that helps.
10.5+23 275/35 General Gmax RS (just lowered off of the lift, no alignment done yet) 10.5+23 275/35 general gmax RS
Thank you very much for the reply. It was very helpful.
A nice set of used wheels for sale with no curb rash. Almost seems too good to be true.
I’m surprised no one has even made me a low-ball offer. I’ll get more pictures of them when I’m at work tomorrow (got them tucked away in my shop) to show the condition of the lips. There is a small section of scratch on one rim lip, but it’s not rashed. Looks like a rock nicked it in the road. I think most people would laugh it off. I’ll let the forum decide, lol.
IMO I think it’s just a hair too aggressive for most people. Was a special order setup for my coupe (back when Work first released these wheels), intended for use w/ coilovers, bags, or springs. Never planned on having a spare set, but it happens haha.
I'd pick these up today if I was in FL. Looking to buy this exact set inspired by your pictures. Let me know if you change your mind on shipping, although not sure how much it would cost vs buying new.
@goldbug wish they'd clear on a sedan, but I'd have to have the fenders pulled I'm pretty sure. Shame - like these wheels and I'm not THAT far from Florida.
I'd pick these up today if I was in FL. Looking to buy this exact set inspired by your pictures. Let me know if you change your mind on shipping, although not sure how much it would cost vs buying new.
Shoot me a PM with your Zip code and I’ll get a quote to see. I have 4x original Work wheel boxes (2 of the boxes go with the wheels) to mail them in still if you don’t want/need the tires, which definitely helps. $1500 is as low as I can go for the wheels and no tires, excluding shipping. But let’s see. Worth at least knowing.
@goldbug wish they'd clear on a sedan, but I'd have to have the fenders pulled I'm pretty sure. Shame - like these wheels and I'm not THAT far from Florida.
@rotarymike Projectpanda actually has a set (unless he’s changed it up) on his sedan, in 19x10.5+23, all around. It looks great IMO, just needs some rear camber he said. He made a post (with good pictures) in the 19” wheel pic thread I linked below.
