yes that’s correct, wheels are not square but the spacers are.

 

I run the coupe version of these wheels on 20mm studded spacers.

Any vibrations on your end? Care to post a picture?

 

No vibrations, added pics to my pictures post above

 

19" Rays G35 Forged Rears in Prismatic Speedway Grey

Wheels: Square set of Rays G35 Rears 19" x 8.5" Offset +33 Weight 20lbs
Tires: Firestone Firehawk Indy 500 255/40/19 Weight 29 lbs
Spacers: Z1 10mm on Front, Z1 5mm on Rear added 20mm and 10mm extended studs respectively
BBK Clearance: Clears the Akebono BBK without spacers
Suspension: G37x Swift Springs, KYB GR2 Struts, Z1 Rear Camber and Traction Arms







Added a 5th picture to show how the powder coat changes based on sunlight. Both the brake calipers and wheels have a bit of sparkle to them when the lighting is just right.

 

Work ZR10 19x10.5 +22 275/35R19 squared, oem alignment. I need to run camber to get clearance in the rear. I would raise if i could, but i'm maxed out on raising my car for the tein coilovers i have.

 

Gramlights 57dr
19x9.5+25 front 19x10.5+35 rear
no rubbing
clears bbk
245/40 front 275/35 rear
lowered on silvers coilovers

 

I love that finish. Really modernizes the look of the wheel. What did that cost for the set?

 

From a site that sells refinished factory wheels? Can you provide a link? Did you need to send them a set of wheels to refinish, or did you purchase a new set?

I've spoken with these guys on several occasions: https://www.lawheel.com/infiniti-g37...els-73716.html

I realize chrome is not everyone's cup of tea, but I saw these once on a stock white G37S and they looked amazing.

 

I've seen pics here on the forum of chromed duckfeet, on a Vibrant Red Sedan, I think.

It looked fantastic.

 

Love these! thanks for sharing, did it require the spacers to clear brakes or was it more for aesthetics

 

Does anyone know of a thread which discusses tradeoffs when running a square setup with width and offset details for the OEM Sport Wheels ("Duckfeet")?

I ask because I have a line on 4 RWD OEM 18" Dark Chrome "Duckfeet" wheels for a too good to be true closeout price, but they only have the Rear 8.5" in stock (fronts are discontinued).

I'm pretty sure that the 225/50 18" inch front tire on the stock 7.5" version of the wheel is too narrow, so I'd need to run 245/45s like I have on the rear. I don't think running 8.5" wide OEM Sport wheels all around will cause rubbing issues? But I figured someone with more custom wheel knowledge would know. If this is the wrong thread, let me know and I will start another.

 

I think the square OEM 18x8.5" setup will work well. The OEM Sport Wheels on the Sedan have a +45 and +50 offset, front to rear respectively. I've got 19x8.5" wheels on the front (Vossen CVT), with +42 offset vs the +50 offset of the 8.5" OEM rears. Plus there's some neg camber in the mix.

I don't think I know what you're driving. (Where's your build thread?) I was assuming you were looking to replace your OEM duckfeet for chromed duckfeet. But maybe not.

 

Go for it, there won't be any fitment issues just make sure you run the 245/45 tires.

 

Hi Rochester. I’m thinking about replacing my factory duckfeet with the “bright wheel” dark chrome version which was offered as an accessory back when we bought new. I found four of these brand new for less than $600 shipped, but they are only the rear 8.5 inch versions. Seems that many on here are running square 19” wheels at 8.5 inches with various offsets, but I’ve only seen a few discuss running a square 18” OEM sport wheel setup.

The +8 offset of the OEM rears vs your wheels means that the extra width of the wheel would be pushed closer to the inner wheel wheel correct? Not to the edge of the fender? My concern is that the wider wheel and tire will rub, but maybe that’s unwarranted since these are barely wider than what’s on there now.

current wheels are in great shape with zero rash or major scratches (see below), and the front almost new PS-4 tires would likely have to stay with wheels since they are too narrow for the 8.5” rim, so I may be able to sell these to someone wanting to run a BBK on a journey (I see lots of these guys on Reddit)

 

Perfect set up broskie ! Im new to this forum. I just got myself a 2014 6MT q60 . Looking for the right fitment and couldn't find anything close to what I wanted since almost every page and post online had people posting their super stretched tires lol no one really with a beefy set up. This is perfect though, wish I saw this prior to ordering my tires. I'll be on the stock 2014 q60S wheels that are 19x8.5 front 19x9 rear. I went with 245/40/19 front and 275/35/19 rear. I'll post some pics once they're mounted. Should arrive by 03/21/2024. Anyways, shout out to everyone here ! lets go !! I'm so hyped for everyone. Hope more people continue to post their G's, never let it die. Legendary whip both sedan and coupe. Love.