FS 2012 G37 Sport Sedan 6MT, CPO + Infiniti Elite Warranty
#1
2012 G37 Sport Sedan 6MT, CPO + Infiniti Elite Warranty
Year: 2012
Make: Infiniti
Model: G37 Sedan
Price: $23000
Mileage: 27750
Color: Graphite Shadow
Private or Dealer Listing: Private Listing
Location (State/Prov): CA
So this is a bit of a feeler... I'm going to be moving into a house that I just bought, and I won't be needing the G as much. I'm thinking of getting something lighter and more track friendly. I'd like to sell as is.
Here are the details:
- 2012 G37S Sedan 6MT
- CPO from Momentum Infiniti in Fairfield, CA
- Infiniti Elite coverage (full B2B extended warranty through Infiniti), 0 deductible, valid through 120,000 miles or 2/18/2020, whichever comes first
- 27,750 miles as of today, which will slowly be going up (not a DD, so it's not going to go up by much)
And the modifications (from my build thread: https://www.myg37.com/forums/build-t...dan-build.html)
Interior:
- 35% tint all around
- WC Lathe Werks Piston ****
- GT-R Starter button with swapped internals
- Carsmo brushed radio / AC *****
- LED lighting; dome, map, door, license, trunk
- Blendmount (for Escort / Beltronics radar detectors)
- Hardwire for RD with stealth mute button in cupholder coin slot
- Laser Shades 3 piece removable rear window shades
Exterior:
- G37 Coupe wheels powdercoated gloss black; staggered with 225/245 Bridgestone RE050A tires with only 4k miles
- Z1 spacers 10mm front & rear
- Front grill professionally painted gloss black
- Rear "spoiler" professionally painted gloss black
- Fog light rings professionally painted gloss black
- Morimoto XB LED Projector fog lights
- Custom headlights: satin black with chrome shroud, RGB halos, modded cutoff, clear lenses, wired with relay to start with car
- Osram CBI 5500k D2S headlight bulbs
- Debadged all rear badging (INFINITI, G37S & Mt Fuji)
- Vinyl wrapped side window trim in gloss black 3m vinyl
- LED Reverse lights, 15w T15 bulbs
- Philips Red Vision LED rear turn signals w/ 6ohm resistors
Performance:
- Tein Street Basis Coilovers
- SPL Rear Camber Arms
- SPC Front Camber Arms + Rear Toe Bolts
- Eibach F&R sway bars
- Takeda CAI
- TWM Short Throw Shifter
- RJM AFP clutch pedal assembly v3
- J2 Engineering catback exhaust
- Berk's high flow cats with Z1 Metal header-HFC gaskets
OEM and additional parts included:
- Stock intake
- Stock S suspension
- Stock exhaust
- Stock cats
- Stock sway bars
- Stock D2S HID bulbs
- Stock interior / exterior bulbs
- NIP Infiniti "Fuji" logo for the trunk
Asking 24,000 with transfer of CPO and Infiniti Elite warranty + all parts
If you have any questions, let me know.
I don't have terribly too many recent normal pictures, so here are some "fancy" ones.
Attachment 1
Last edited by lobuzz311; 08-09-2016 at 07:05 PM.
The following users liked this post:
lobuzz311 (04-29-2016)
The following users liked this post:
lobuzz311 (04-29-2016)
The following users liked this post:
lobuzz311 (04-29-2016)
Trending Topics
#12
SO TEMPTING! I REALLY like the look of what you've done.. but I am so iffy on buying a modded car. I'll be looking to get a 6-spd Sedan in about two months once I get settled in with the new job. But this'll probably be gone by then.
#15
Made an account just for this, quit lurking lol.
I am very interested and located in California.
Where are you located in California? Can you PM me some details?
Been looking for a clean 6MT sedan for a while.
I am very interested and located in California.
Where are you located in California? Can you PM me some details?
Been looking for a clean 6MT sedan for a while.