FS CNC bored 63mm OEM throttle bodies!!
Category: Engine - Intake/Fuel
Price: $485
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Coupe, 2010+ G37 Sedan, 2008-2009 G37 Coupe, 2008-2009 G37 Sedan
Location (State/Prov): OH
Item Condition: Used
Throttle Body Results
RESULTS! I will recommend these!
Dyno: Dynojet
Dyno video:
Dyno graph:
Car: 08' G37s 6MT
The Throttle Bodies were the last mod that I have done. Prior to the new throttle bodies my numbers:
304.87 HP
256.86 TQ
STD
Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune.
Numbers after the new TB's and retune:
317.92 HP
269.98 TQ
SAE
Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune, 63mm ported TB's.
Dyno: Dynojet
Dyno video:
Dyno graph:
Car: 08' G37s 6MT
The Throttle Bodies were the last mod that I have done. Prior to the new throttle bodies my numbers:
304.87 HP
256.86 TQ
STD
Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune.
Numbers after the new TB's and retune:
317.92 HP
269.98 TQ
SAE
Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune, 63mm ported TB's.
Nice!! More hp/tq AND you went from STD to SAE! Should email the tuner and ask for STD graph just to show the apples to apples difference. Should be another 4% on top of the 317/269.
I as well as a friend had errors codes. All you need to do are the resets for the ECU/TPS/etc. The resets probably take 10 min total if you get them right the first/second time. Just DO NOT be alarmed. Still check the codes to make sure, but more than likely you will get codes, just be aware :-D I do believe the Uprev tune should be able to clear the codes also, but I did not ask my tuner because I already had done the resets
let me know once you ship mine out!!! I will be paying for the intake collector aswell to get full tune when its done!!! OneSick did you do the lower intake collector or just throttle bodies?
this is done on a dynojet versus a mustang dyno...I have the same mods and I was doing 310 at the wheels untuned with Takeda not stillen on a mustang dyno on my sedan. 297 at the wheels when I switched to fast intentions HFC and tuned now. mustang dyno.
I would assume a nice little increase as well with the lower. Ill probably have him make me some in the spring. I ran mine in the winter last year and it did great, but I had VERY mild mods then and also had winter tires. Now I have many more mods with NO winter tires lol. I would go ahead and pick it up if I were you though so you can just tune it all at the same time
I would assume a nice little increase as well with the lower. Ill probably have him make me some in the spring. I ran mine in the winter last year and it did great, but I had VERY mild mods then and also had winter tires. Now I have many more mods with NO winter tires lol. I would go ahead and pick it up if I were you though so you can just tune it all at the same time
Also ALL manis can be ported, even the m370


