FS BNIB SPC Front Camber Arms - G37 Coupe
01-21-2012, 08:18 PM
#1
BNIB SPC Front Camber Arms - G37 Coupe
Category: Steering & Suspension
Price: $320
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Coupe, 2008-2009 G37 Coupe
Location (State/Prov): TX
Item Condition: Brand New
I have a set of brand new in the box Eibach/SPC Camber Arms for the G37 coupe. I purchased them about 2 months ago and just never got around to install them. I paid 342.00 + shipping. Moving them fast at the price of $320.00 shipped. The price is firm.
The box has been opened for inspection and that's it. No pictures as I have sealed the box back up but here's a pic for your reference:
01-26-2012, 08:21 AM
#5
Administrator
Stupid question, toe bolt included?
Trending Topics
01-28-2012, 03:42 PM
#8
Hello my friends Sorry for the delay in the reply !! No front camber arms do not have/require toe bolts, like the rear does.
Here is the description from SPCs site for further information:
-----------------------------------
These front upper control arms will give you -1 degree to +1.0 degree caster change and up to -2.5 degrees to +2.5 degrees camber change. Simply replace the OE front upper control arms and dial in your suspension angles with our patented sliding ball joint and caster plate. Whether you want to tune your suspension for the ultimate in handling performance, minimize tire wear or easily move back and forth between the two settings, these are the arms to get the job done.
Front Adjustment range: Camber: -2.5 degrees to +2.5 degrees
Caster: -1.0 degrees to +1.0 degrees
-----------------------------------
A lot of you might wonder, gee why such a great deal pollo.... the answer is rather simple. I do not plan on going lower than I am right now and the alignment shop was able to dial the front camber to close to perfect specs, so I will avoid the trouble and bloody knuckles to install them. I do have rear camber arm and toe bolt all set like baws !!
If anyone buys it before this weekend ends... you can have them for $300.00USD shipped.
Holler back !
Here is the description from SPCs site for further information:
-----------------------------------
These front upper control arms will give you -1 degree to +1.0 degree caster change and up to -2.5 degrees to +2.5 degrees camber change. Simply replace the OE front upper control arms and dial in your suspension angles with our patented sliding ball joint and caster plate. Whether you want to tune your suspension for the ultimate in handling performance, minimize tire wear or easily move back and forth between the two settings, these are the arms to get the job done.
Front Adjustment range: Camber: -2.5 degrees to +2.5 degrees
Caster: -1.0 degrees to +1.0 degrees
-----------------------------------
A lot of you might wonder, gee why such a great deal pollo.... the answer is rather simple. I do not plan on going lower than I am right now and the alignment shop was able to dial the front camber to close to perfect specs, so I will avoid the trouble and bloody knuckles to install them. I do have rear camber arm and toe bolt all set like baws !!
If anyone buys it before this weekend ends... you can have them for $300.00USD shipped.
Holler back !
01-29-2012, 02:03 AM
#10
Administrator
300 shipped?? My credit card is in hand
