So I just resealed my headlights and added the iron man LED's a few weeks ago. I loved how they turned out and I shouldn't run into any more problems with condensation.

I didn't use the typical rocker switch for the iron man. I used a push button with a blue ring that lights up when pressed. I also wired in a relay kit which made wiring the switch much easier.

I want to give a HUGE shout out to Weiboy718. He walked me through the entire process and I could not have done it without his help. He's a great guy and knows his stuff.

LEDs

Switch

Sealant

Relay Harness

Onto the pics. These are all I have for now:

 

Ef me, I NEEEEDD this mod.

 

DIY it lefty. it's really not that hard if you take your time.

 

Lefty: Use the sealant I linked. Not the one in the DIY.

 

OCI Butyl Rubber Glue - Accessories from The Retrofit Source Inc


i used this. was super super easy to work with.

i thought i remembered seeing somewhere that you have to heat up the stuff you linked to get it to be able to work with it......or is that wrong?




but ya...the DIY sealant is NOT the correct stuff to use.

 

Where's the DIY link? If I tackle it, I'm going to be putting the TSX lenses in as well.

 

https://www.myg37.com/forums/d-i-y-i...eadlights.html

 

That's awesome! Great job. Looks good

 

Yes you do have to put it in the oven to heat it up and use it. Still pretty easy.

 

WeiBoy is the MAN! He did mine too. Awesome work from an awesome dude.

 

Love the mod!

 

damn those are sick.. good job!