Heads or Tails?? BOTH!!
.
06-16-2011, 01:26 AM
#18
Registered User
Thread Starter
Join Date: Oct 2008
Location: Connecticut/NY
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
See if you can just get em from photobucket here -
G37III pictures by dcook42 - Photobucket
@Graphite - yeah they're vossen 084... all i know is they're 9" up front and 10.5" in the rear, wrapped in Vredestein Ultrac Sessanta's.
G37III pictures by dcook42 - Photobucket
@Graphite - yeah they're vossen 084... all i know is they're 9" up front and 10.5" in the rear, wrapped in Vredestein Ultrac Sessanta's.
06-16-2011, 02:04 PM
#21
Registered User
Thread Starter
Join Date: Oct 2008
Location: Connecticut/NY
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
07-18-2011, 10:43 AM
#23
Registered User
Thread Starter
Join Date: Oct 2008
Location: Connecticut/NY
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Well, I just made a purchase 
I ordered some H&R spacers seen here: STILLEN : H&R TRAK+ Wheel Spacers
The salesman asked if I wanted to be "safe" or "more aggressive", of course I said more aggressive, and I'm going to try +20mm in the front, and +25 in the back (the safe option was 15mm/20mm). You guys think I'll be OK with those dimensions?
Will post new pics when I get 'em installed
I ordered some H&R spacers seen here: STILLEN : H&R TRAK+ Wheel Spacers
The salesman asked if I wanted to be "safe" or "more aggressive", of course I said more aggressive, and I'm going to try +20mm in the front, and +25 in the back (the safe option was 15mm/20mm). You guys think I'll be OK with those dimensions?
Will post new pics when I get 'em installed
07-27-2011, 04:09 PM
#24
Registered User
Thread Starter
Join Date: Oct 2008
Location: Connecticut/NY
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Bad News: 25mm spacers in the rear rubbed, badly. Unless you drove super carefully. They will be going for sale , PM if interested.
/edit - swapped 20mm to rear, even they rubbed on hard corners and small potholes. I think I'll be going 15mm all around.
/edit - swapped 20mm to rear, even they rubbed on hard corners and small potholes. I think I'll be going 15mm all around.
Last edited by DCook42; 07-27-2011 at 10:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
blnewt
D.I.Y. Installations/Modifications
37
10-17-2020 11:12 AM
timc00k
Body Interior Exterior Lighting
1
02-15-2017 09:15 AM
