When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Your complaining about Eibachs, WOW! You roads must suck, bc Im on H&Rs and never scrape
Nobody is complaining. It wasn't a road. It was a parking lot. That particular part of town has horrible curbs and parking lots. The guy that was behind me scraped too and he has a stock G35 Coupe.
Update: I bottomed out last night in a horrible parking lot.
Checked under the car today and decided to take a couple of pics and measure using a mans measuring tool.
No injuries
A full 6 days have passed since install.
This car is getting a lot lower than expected. You can barely see the top of the front tires. No regrets.
*Dr. Pepper was tasty.
thats the only thing i scrape on , and im dropped on s-techs, a new exhaust would take care of that
ah boo. did you get toe arms though? like i said, its more important for me to get my toe into spec. some neg camber wont wear tires that much faster.
SPC part #72260, which is the same as Eibach #5.72260K, includes both the camber adjustment arm and the toe bolts. Now you have to be careful when looking at the two web sites. The pictures are accurate on the SPC site and wrong on the Eibach site.
There is also #72265 and #7.72265K which is just the toe bolts.
just want to make sure this was before camber kits correct? thats just about what im shooting for. close to 0 toe and slight negative camber. thanks.
Originally Posted by hamdavid
Nope. That is my results after springs and camber kit. I am almost positive that you cannot get to -0.8 w/o a camber kit.
Originally Posted by w0ady
ah boo. did you get toe arms though? like i said, its more important for me to get my toe into spec. some neg camber wont wear tires that much faster.
Originally Posted by hamdavid
SPC part #72260, which is the same as Eibach #5.72260K, includes both the camber adjustment arm and the toe bolts. Now you have to be careful when looking at the two web sites. The pictures are accurate on the SPC site and wrong on the Eibach site.
There is also #72265 and #7.72265K which is just the toe bolts.
and measure using a mans measuring tool.
, and im dropped on s-techs, a new exhaust would take care of that 
