Mark this thread as Unsold
FS Aftermarket & OEM Part Out
#16
Registered Member
Interested in Y pipe and exhaust
Category: Accessories
Price: $50
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Coupe, 2010+ G37 Sedan
Location (State/Prov): GA
Item Condition: Used
My 2015 Q40 was totaled so I have a small collection of aftermarket parts that need a new home.
Feel free to post or PM with any questions or reasonable offers. Shipped prices are within the US only, I will ship internationally if needed at Buyer's cost.
***SOLD*** GT-R Start Button modded by Gabe (grojas112) - Fits G37 & Q40 (not sure about G35) - $45/shipped ***SOLD***
Just the button is included, no trim ring, etc.
Lock is Red, Acc is Yellow, On is Green (second photo shows each position)
***SOLD*** Diode Dynamics Tail as Turn Modules - $50/shipped ***SOLD***
Fits G35, G37, & Q40
***SOLD*** Fortin EVO-NIST1 Remote Start System - $70/shipped ***SOLD***
This was installed for only 2 weeks prior to my car being totaled and it was amazing to have, I'll be getting one for my new car asap. Everything is intact and no wiring was damaged in the removal.
It is currently programmed to my Q40 but because I have the Fortin Flash Link I can reflash it to whichever model you have (the NIST1 harness fits 2007+ G35/G37/Q40, plus other Nissan/Infiniti models listed here: https://fortin.ca/en/products/evo-rs.../vehicles.html).
***SOLD*** OEM Paddle Shifters & Shroud Kit - $220/shipped ***SOLD***
Probably one of my favorite interior additions and super easy to install as our cars are factory prewired for these.
The paddles have some slight edge wear (pictured below), but this was present when I purchased them and they did not get any worse. The shroud kit (for manual tilt wheel) is intact with no broken pieces.
Hardware to mount the paddles is included, plus hardware for the shroud in case you have any missing. The shroud bolt covers are also included, just not in place for pictures.
***SOLD*** USA Spec BT45-INFI Bluetooth Adapter - $100/shipped ***SOLD***
Uses/intercepts the satellite tuner to allow Bluetooth connection to the radio, it doesn't prevent use of the satellite radio. The Q40 had no RCA, USB, etc. inputs, so this was the best solution.
Compatibility chart here: https://m.media-amazon.com/images/I/81oljUZwzFL.pdf (Infiniti section is bottom of page 2).
***SOLD*** Mishimoto Silicone Intake Tubes & aFe Drop In Dry Flow Air Filters - $175 ***SOLD***
Four T-bolt clamps included. Butt dyno said these made a slight increase in power but they definitely sounded better, plus no heat soaking like short air intakes. Cleaned and ready to go.
Ultra Racing Solid Shock Tower Brace - $150/shipped
The changes with this were mainly noticeable during quick turns and at lower speeds. Solid design prevents flex/movement seen with 3-piece STBs where they bolt together.
This is boxed and ready to ship.
Rear Diffuser Panel by TBW Performance - $150 + shipping
Made out of aluminum, it replaces the rear plastic panel and looks a lot better doing it. Fits 07-08 G35, 09-13 G37, and 2015 Q40 sedans.
A few fins have edge scrape damage from a bad driveway exit angle but some touch up paint made it unnoticeable unless you're right up on them while laying on the ground.
***SOLD*** OEM 2010+ G37/Q40 Non-Sport Front Lip - $250 ***SOLD***
This is brand new, never installed. Factory painted in Moonlight White (QAA). Includes instructions, hardware, and mounting template.
OEM G37/Q40 Trunk Lid Spoiler - $150 + shipping
This was installed & removed, so replacement of the 3M mounting tape will be required. Factory painted in Moonlight White (QAA). Includes hardware and mounting bracket for the camera and trunk release button.
Top Speed Pro 1 Y-Pipe Back Exhaust - $350
If you're looking for something that is louder than stock but is not obnoxious or raspy and has no drone at cruise, then this is the exhaust you're looking for.
All cleaned up and ready for a new home. Because of the size/weight I would prefer local pickup only, although I am willing to ship once I can find packing for it if needed. I am also willing to meet within a reasonable distance.
Feel free to post or PM with any questions or reasonable offers. Shipped prices are within the US only, I will ship internationally if needed at Buyer's cost.
***SOLD*** GT-R Start Button modded by Gabe (grojas112) - Fits G37 & Q40 (not sure about G35) - $45/shipped ***SOLD***
Just the button is included, no trim ring, etc.
Lock is Red, Acc is Yellow, On is Green (second photo shows each position)
***SOLD*** Diode Dynamics Tail as Turn Modules - $50/shipped ***SOLD***
Fits G35, G37, & Q40
***SOLD*** Fortin EVO-NIST1 Remote Start System - $70/shipped ***SOLD***
This was installed for only 2 weeks prior to my car being totaled and it was amazing to have, I'll be getting one for my new car asap. Everything is intact and no wiring was damaged in the removal.
It is currently programmed to my Q40 but because I have the Fortin Flash Link I can reflash it to whichever model you have (the NIST1 harness fits 2007+ G35/G37/Q40, plus other Nissan/Infiniti models listed here: https://fortin.ca/en/products/evo-rs.../vehicles.html).
***SOLD*** OEM Paddle Shifters & Shroud Kit - $220/shipped ***SOLD***
Probably one of my favorite interior additions and super easy to install as our cars are factory prewired for these.
The paddles have some slight edge wear (pictured below), but this was present when I purchased them and they did not get any worse. The shroud kit (for manual tilt wheel) is intact with no broken pieces.
Hardware to mount the paddles is included, plus hardware for the shroud in case you have any missing. The shroud bolt covers are also included, just not in place for pictures.
***SOLD*** USA Spec BT45-INFI Bluetooth Adapter - $100/shipped ***SOLD***
Uses/intercepts the satellite tuner to allow Bluetooth connection to the radio, it doesn't prevent use of the satellite radio. The Q40 had no RCA, USB, etc. inputs, so this was the best solution.
Compatibility chart here: https://m.media-amazon.com/images/I/81oljUZwzFL.pdf (Infiniti section is bottom of page 2).
***SOLD*** Mishimoto Silicone Intake Tubes & aFe Drop In Dry Flow Air Filters - $175 ***SOLD***
Four T-bolt clamps included. Butt dyno said these made a slight increase in power but they definitely sounded better, plus no heat soaking like short air intakes. Cleaned and ready to go.
Ultra Racing Solid Shock Tower Brace - $150/shipped
The changes with this were mainly noticeable during quick turns and at lower speeds. Solid design prevents flex/movement seen with 3-piece STBs where they bolt together.
This is boxed and ready to ship.
Rear Diffuser Panel by TBW Performance - $150 + shipping
Made out of aluminum, it replaces the rear plastic panel and looks a lot better doing it. Fits 07-08 G35, 09-13 G37, and 2015 Q40 sedans.
A few fins have edge scrape damage from a bad driveway exit angle but some touch up paint made it unnoticeable unless you're right up on them while laying on the ground.
***SOLD*** OEM 2010+ G37/Q40 Non-Sport Front Lip - $250 ***SOLD***
This is brand new, never installed. Factory painted in Moonlight White (QAA). Includes instructions, hardware, and mounting template.
OEM G37/Q40 Trunk Lid Spoiler - $150 + shipping
This was installed & removed, so replacement of the 3M mounting tape will be required. Factory painted in Moonlight White (QAA). Includes hardware and mounting bracket for the camera and trunk release button.
Top Speed Pro 1 Y-Pipe Back Exhaust - $350
If you're looking for something that is louder than stock but is not obnoxious or raspy and has no drone at cruise, then this is the exhaust you're looking for.
All cleaned up and ready for a new home. Because of the size/weight I would prefer local pickup only, although I am willing to ship once I can find packing for it if needed. I am also willing to meet within a reasonable distance.
#18
Per Top Speeds website: "Infiniti G35 Sedan 07-08 & G37 Sedan 09-13 fits RWD & AWD Version", so should fit your x just fine.
You can verify if you'd like: https://topspeedauto.com/infiniti-g3...vel-edge-tips/
Please note that finding packaging to ship it might take a little bit of time, that would be the only constraint.
You can verify if you'd like: https://topspeedauto.com/infiniti-g3...vel-edge-tips/
Please note that finding packaging to ship it might take a little bit of time, that would be the only constraint.
#24
Oddly it was one of my favorite mods and I never intentionally took pictures of it, however, I did find it in a picture I had on my phone.
It's been brightened a bit to take some of the shadows away and allow you to see the diffuser.
In case you haven't seen the pics on TBW's website, they have a few good angles:
It's been brightened a bit to take some of the shadows away and allow you to see the diffuser.
In case you haven't seen the pics on TBW's website, they have a few good angles:
#25
The three remaining parts are all now available to ship and the diffuser & shock tower brace prices include shipping costs.
Thread
Thread Starter
Forum
Replies
Last Post