I've been talking to Tony&Mariella Colette this past couple weeks about the rattle issue against the subframe that a few of us are having with our 09'+ and so he had FINALLY released me the "prototype" xyz pipe coming by this Friday. The new pipe will give us a extra 1/2 of clearance.

Tony given me the okay to post this announcement up to make it aware he has come up with the solution for the rattling. Contact them by Sales (661) 298-7555 or by email so they can warrant you the new pipe

Customer service at it best MD FTMFW

 

Motordyne FTMFWBBQSAUCEAGE!

 

I know this will make a lot of folks happy. Thanks for sharing.

 

Just doing my role as the satisfied customer! Only thing they ask of you is to return the old XYZ pipe with the supplied return slip they had also supplied us with in the box.

Have yet to install it so I can't compare it to the old XYZ pipe to give my full review on it, but it looks like Tony has utilize a new flex-pipe giving it more flexibility and has slightly more angled to it from pipe to flange which all in all was said to give 1/2in clearance from subframe.

Quality is top notch like always and here's the proof









I am not sponsored by them or anything but I hope this thread will persuade future businesses for Tony&Mariella seeing how they treat their customers right from day one!

 

i installed mine yesterday and no rattles, tons of clearance too about 3/4"

 

Here's couple comparisons of the newly redesigned xyz pipe, you can tell Tony had used a bigger flexpipe, and from the cat to xyz flexpipe, it has been extended to a longer length compared to old xyz pipe. So far so good no more rattling! Tony had done an excellent job fixing this issue and how he had handle it. All I can say that I'm set on Motordyne products and services; best in the business.









Special thanks to Tony&Mariella Colette and Warat helping me with install

 

No prob broski.. Just happy to see your beast not rattling anymore.. LOL

Motordyne customer service = A+++++

I'm a customer for life.

 

Me too!

Damn the camera on my Amaze (top2 pics) and your iPhone 5 (bottom2 pics) are pretty sweet lol Think mine is a slighly better lol jp

 

No chit yours do look better. Lol

 

Are u sure there is a half inch clearance ?? Looks like its still resting on the cross member ????

 

I'm sure it's just the angle.

 

I don't think it's a angle thing .. I just spoke to another forum member with the revised y-pipe and same problem .. Here I come again FastIntentions ..

 

ha no it's not 1/2 as stated, sorry forgot to revised that statement, and no the pipe is not rested on subframe like the old xyz pipe had before.

So the revised xyz pipe has fixed "my" rattling issue; sorry to hear others still have the rattling issue even with the new revised xyz pipe

I say contact Tony Colette Neverbonestock he'll make it right as he's trying to solve the issue in hand.

 

This is great news. Ready to get rid of the rattle.

 

Update, Tony had contacted me last week about revising another XYZ pipe for extra clearance from what he had with the V2. Says to get back with him in a month for the V3 so keep faith ppl ha Tony will make this right!