Polished pipes reflect away heat to some extent. Heat wrap on a CIA is a bit of a waste unless of course it's sitting within an inch or two of an exhaust.

 

Well, the word from Byron is that the shipment of washer fluid bottles is coming in next week so once those come in, expect to see the intakes available within a week or two after that

 

Anyone see Injen's design for their 2007-up 350Z intake? Check it out: http://www.my350z.com/forum/showthread.php?t=360165

 

Yep I was watching Byron (guy in 1st pic) install that one on Friday to show at the Injen booth at Stillen yesterday. Once he gets back from his vacation in Switzerland after Memorial Day I'm getting my intakes

 

Is the routing of the piping and the placement of the filters the same on that Z as it is on the 37?

 

Nope. Completely different. The G37 intake is 1 long pipe while the 350Z intake was 2 pieces of pipe and a rubber (I think) elbow.

 

if the filters sit in the same area or even the same height there is no way in hell to hydro lock the car. if your driving in a puddle that deep, the last thing you should be worried about is your intake...

 

Filters on the G37/G35 sedan sit at the very bottom of the car right above the black cover panel (can't think of the name of it), so hydrolock is a possibility. The 350Z and G37/35 sedan setups are two completely different designs.

 

just release this!!!

 

Hmmm...too bad. I like the placement in the Z better.

 

Same here. Byron initially tried to do the same design on the G37 but there wasn't enough room for it like there was on the Z

 

I also really like the placement on the Z...

Are we going to get some G37 pics of a fully instlaled system, with the bumper off so we can see first hand where they sit? Seems to me like it would put an end to all the sepculation about sucking water.

 

^Hopefully gmlee has his camera handy when they are installing his in a few weeks...

 

Oh yeah BTW... Spoke to the owner of injen and he told me these are gonna be available in black polished tubing as well... SWEET!

 

any update on the exhaust?