Group Buy - Clutch Pedal Assist Spring for 6MT
Registered Member
Joined: Apr 2011
Posts: 331
Likes: 2
course not hahaha
Thread Starter
Joined: Oct 2011
Posts: 6,103
Likes: 593
From: People's Republic of IL
All springs have been mailed out for payments received through this afternoon (more like 2pm CST). My next run to the PO will be on Monday.
It appears usps DC #'s are getting more frequent scans than before. You can almost follow the path through the system. It used to be you get a pickup or acceptance scan and then a delivery. Now they're showing intermediate scans too.
It appears usps DC #'s are getting more frequent scans than before. You can almost follow the path through the system. It used to be you get a pickup or acceptance scan and then a delivery. Now they're showing intermediate scans too.
Registered User
Joined: Dec 2011
Posts: 21
Likes: 0
From: Allentown pa area
took out the stock spring and amazed how much better if feels. I have had my car for about a week, and felt like I had forgotten how to drive stick. I ordered the spring, but i am thrilled as is
Thread Starter
Joined: Oct 2011
Posts: 6,103
Likes: 593
From: People's Republic of IL
Small suggestion for doing the install.
Once you have the bottom clevis out, if you examine it closely, one side has 2 little circles on it (~1/8" diameter), while the other side does not. When reinstalling with the lighter spring, make sure these 2 little circles face to the right or towards the brake pedal. Although one would think both holes are machined to the same diameter, I found future removal of the lower pin to be easier with the clevis oriented this way. Facing left makes it more difficult to remove the pin.
For a while there I was running with no spring, but found the slop in the pedal to be bothersome, so put the spring in a few days ago. Still has some play if you push down lightly with a finger, but otherwise comes to rest at the far top and stays there.
Once you have the bottom clevis out, if you examine it closely, one side has 2 little circles on it (~1/8" diameter), while the other side does not. When reinstalling with the lighter spring, make sure these 2 little circles face to the right or towards the brake pedal. Although one would think both holes are machined to the same diameter, I found future removal of the lower pin to be easier with the clevis oriented this way. Facing left makes it more difficult to remove the pin.
For a while there I was running with no spring, but found the slop in the pedal to be bothersome, so put the spring in a few days ago. Still has some play if you push down lightly with a finger, but otherwise comes to rest at the far top and stays there.
Registered User
Joined: Dec 2011
Posts: 58
Likes: 3
From: Georgetown Ontario Canada
^^Review the first link in the opening post. The g37 implementation is 100% identical to the 370Z.
Some are finding it easier to ziptie the old/new spring before taking the tension off. I suppose that makes it easier for a one person operation, but that, or depress the pedal, or have your helper depress while you remove it.
It takes me longer to gather all the tools than to actually pop the clip and swap springs. Some white lithium grease on the shaft and pivots wouldn't hurt either.
PS. Yours is in the mail.
Some are finding it easier to ziptie the old/new spring before taking the tension off. I suppose that makes it easier for a one person operation, but that, or depress the pedal, or have your helper depress while you remove it.
It takes me longer to gather all the tools than to actually pop the clip and swap springs. Some white lithium grease on the shaft and pivots wouldn't hurt either.
PS. Yours is in the mail.
I"ve read the threads, and the links. Perhpas once I remove the existing assembly - it'll become clear how to swap the new lighter spring into the assembly. Haven't seen that shown anywhere that I can recall.
Looks like maybe the whole thing just "falls apart" once out of the two pinned locations and the replacement spring can be put in very easily.
