Berk Hfc Groupbuy Through Hpautoworks.com
#1
Berk Hfc Groupbuy Through Hpautoworks.com
BERK HFC GROUPBUY THROUGH HPAUTOWORKS.COM
I worked out a deal with Andy from www.hpautoworks.com to host a group buy for the Berk HFC’s. This group buy will end and orders fulfilled to Berk at the end of the month on August 31st.
Sales Breakdown
1 -15 sale price will be $450
16 – 30 sale price will be $430
Shipping charges are already included for the 48 states.
Q&A:
Q: how does the pricing work?
A: If we only sell say 5 then the price each person would pay is $450. If we sell 16+ then everyone on the group buy will get them for $430.
Q: Is shipping already included?
A: Yes, it’s included if the destination is within the 48 continental states.
Q: what if I live in Hawaii or Alaska
A: Contact myself or andy for more information
Q: When do I have to pay?
A: You will pay up front much like a pre-sell.
Q: When will I get my HFC’s?
A: At the end of the month (August 31st) the group buy will be over. At that time hpautoworks will place the order with Berk. Berk had confirmed with Andy that their expected turn around time for say 30-40 HFC’s is 48 hours.
Q: How do I order?
A: See order instructions below.
Q: Is there a local Pick Up option, how do I arrange a pickup? Is there a price break?
A: You can pick it up at HPautoworks in Tempe, AZ. Place the order and contact Andy to setup Pickup arrangements. There is no price break for a local pickup as the shipping would be applied to local tax. You will pay the same as everyone else, but have it earlier.
Q: What if I have a question.
A: Post in this thread and I’ll do my best to answer. Also I will update this initial thread to lesson the repetitive questions.
------ORDER INTRUCTIONS------
1. Go to hpautoworks.com and find the Berk HFC’s or click the link below.
http://hpautoworks.com/index.php?mai...oducts_id=4269
2. Add it to the cart and proceed through the checkout.
3. In the comments area of the order page. Put the following in the comment field
“MYG37 GB [FORUM NAME HERE]” example* MYG37 GB willizm*
4 Complete the order. You will pay full price in the checkout, BUT YOU WILL BE REFUNDED BACK DOWN TO THE GB PRICE. The charge is not submitted to your credit card until after the price has been corrected to reflect the GB price. You will not get charged the full price. Andy will manually place the charge of $450. If you pay via paypal you will get a refund shortly from Andy which will either go toward your paypal balance or back on your card.
5. Message me via PM to add you to the list. You will be added as pending. Once I have confirmation I will remove pending from the list.
6. Sit back and relax. If you are one of the first 15 and the order goes over that then you will get a nice $20 refund.
These are the best prices that I have seen including the initial group buy by Berk.
Independent dynos done by forum members
https://www.myg37.com/forums/intake-and-exhaust/181041-berk-hfc-s-dyno-tested.html
https://www.myg37.com/forums/intake-and-exhaust/179059-berk-hfcs-before-and-after-dyno-plus-thoughts.html
------CONTACT INFO------
Willizm – wditton@gmail.com
Andy – andy@hpautoworks.com
List of Buyers.
1 - Willizm
2 - sredish - pending
3
4
5
6
7
8
9
10
11
12
13
14
15
I worked out a deal with Andy from www.hpautoworks.com to host a group buy for the Berk HFC’s. This group buy will end and orders fulfilled to Berk at the end of the month on August 31st.
Sales Breakdown
1 -15 sale price will be $450
16 – 30 sale price will be $430
Shipping charges are already included for the 48 states.
Q&A:
Q: how does the pricing work?
A: If we only sell say 5 then the price each person would pay is $450. If we sell 16+ then everyone on the group buy will get them for $430.
Q: Is shipping already included?
A: Yes, it’s included if the destination is within the 48 continental states.
Q: what if I live in Hawaii or Alaska
A: Contact myself or andy for more information
Q: When do I have to pay?
A: You will pay up front much like a pre-sell.
Q: When will I get my HFC’s?
A: At the end of the month (August 31st) the group buy will be over. At that time hpautoworks will place the order with Berk. Berk had confirmed with Andy that their expected turn around time for say 30-40 HFC’s is 48 hours.
Q: How do I order?
A: See order instructions below.
Q: Is there a local Pick Up option, how do I arrange a pickup? Is there a price break?
A: You can pick it up at HPautoworks in Tempe, AZ. Place the order and contact Andy to setup Pickup arrangements. There is no price break for a local pickup as the shipping would be applied to local tax. You will pay the same as everyone else, but have it earlier.
Q: What if I have a question.
A: Post in this thread and I’ll do my best to answer. Also I will update this initial thread to lesson the repetitive questions.
------ORDER INTRUCTIONS------
1. Go to hpautoworks.com and find the Berk HFC’s or click the link below.
http://hpautoworks.com/index.php?mai...oducts_id=4269
2. Add it to the cart and proceed through the checkout.
3. In the comments area of the order page. Put the following in the comment field
“MYG37 GB [FORUM NAME HERE]” example* MYG37 GB willizm*
4 Complete the order. You will pay full price in the checkout, BUT YOU WILL BE REFUNDED BACK DOWN TO THE GB PRICE. The charge is not submitted to your credit card until after the price has been corrected to reflect the GB price. You will not get charged the full price. Andy will manually place the charge of $450. If you pay via paypal you will get a refund shortly from Andy which will either go toward your paypal balance or back on your card.
5. Message me via PM to add you to the list. You will be added as pending. Once I have confirmation I will remove pending from the list.
6. Sit back and relax. If you are one of the first 15 and the order goes over that then you will get a nice $20 refund.
These are the best prices that I have seen including the initial group buy by Berk.
Independent dynos done by forum members
https://www.myg37.com/forums/intake-and-exhaust/181041-berk-hfc-s-dyno-tested.html
https://www.myg37.com/forums/intake-and-exhaust/179059-berk-hfcs-before-and-after-dyno-plus-thoughts.html
------CONTACT INFO------
Willizm – wditton@gmail.com
Andy – andy@hpautoworks.com
List of Buyers.
1 - Willizm
2 - sredish - pending
3
4
5
6
7
8
9
10
11
12
13
14
15
Last edited by willizm; 08-11-2008 at 09:51 PM.
#2
No problem, also keep in mind the only other cheapest place you can get these is for $460 + shipping. Came out to $496.
Needless to say that the $450 and possibly $430 price is outstanding
Needless to say that the $450 and possibly $430 price is outstanding
#4
Premier Member
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,346
Likes: 0
Received 3 Likes
on
3 Posts
Someone who is Premier on Driver should post this over there. This should work for the newer G35 sedans so they might have some interest in it over there and it would get more people on this GB.
Trending Topics
#8
Many people have had the HFC's installed, but some have posted issues with the occasional service light pop up. Don't know if Max or BBoy can chime in here as I haven't gotten mine yet. There have been a coupe guides regarding install with extra attention to removing the sensor properly as to not strip the threads or damage it.
HFC's ftw.
Also, keep in mind that alot of people that have gotten the HFC's believe its the best performance mod for the money,
HFC's ftw.
Also, keep in mind that alot of people that have gotten the HFC's believe its the best performance mod for the money,
#9
Premier Member
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,346
Likes: 0
Received 3 Likes
on
3 Posts
No SES light on mine until after I got my JWT installed and the light doesn't come on consistantly. My HFCs ran for months without a light and then a week after the JWT my light came on.
#10
Registered User
iTrader: (2)
Join Date: Apr 2008
Location: Waldorf, MD
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Have you pulled the code to see what the computer is seeing?
I would think the motor is going lean moving a good deal more air through it.
Or you are on the border and that is why it is intermittent.
I would think the motor is going lean moving a good deal more air through it.
Or you are on the border and that is why it is intermittent.
#11
Premier Member
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,346
Likes: 0
Received 3 Likes
on
3 Posts
It is the sensor on the HFC. The right side sensor for the first SES. I got a new SES light going to work today thanks to PMS1212. lol. I will have to see what it reads when I get home. I think it has been a week or so since I cleared the last SES.
#13
Premier Member
iTrader: (17)
I had just the Berks and Stillen cat-back and had SES issues from day 1. They are tripping do to running lean. I went to the dealership to have the sensor checked to make sure the shop didn't break the sensor, cause that IS an issue. Sensor was fine. The tech cleared the codes, but SES tripped again after a drive cycle. I went back and he did some research on our cars and found that he needed to clear the learned A/F ratio values. After he cleared the learned values, he let the car re-learn the A/F ratio with the mods. Problem solved, I've never had any issues after that. Berk has a great product, and NICE gains you can really feel. You should jump on this GB peoples, I wish I could have got that price a couple months ago