General Tech Questions Scheduled maintenance, Tune-ups Oil changes, service bulletins and other FAQs for the G37

Help BCM Programming question/assistance

Old Oct 7, 2023 | 07:23 PM
  #1  
neo4888's Avatar
neo4888
Thread Starter
Registered Member
 
Joined: Sep 2023
Posts: 2
Likes: 0
BCM Programming question/assistance

Hey everyone, I have a 2013 g37 sedan journey that had the infamous sunroof drain leak which got the bcm wet. it cause the vehicle turn signal, wiper blades, alarm to randomly go off. I permanently fixed the issue and by running the sunroof drain hose to the ac drip line in the floorboard. I removed all the water and let the car dry for over a week and bcm was out drying out. ran fine for a few months and then recently alarm going off randomly. Then the radio would stay on and Bluetooth and kill the battery. did some searches to see how to resolve and decided most likely bcm is damage due to the water. I purchased a brand new bcm same part number from nissan dealership and had a lock smith come out to program. Well they were able to program one key fob and vehicle would start. I confirm the one key fob locks and unlocks the car but them notice when you go to start the dash states to push clutch in which this is an automatic. Did some searches and seems i need to set the correct type id to show automatic. Does anyone know of a scan tool that can do this or only the dealership ? any suggestion would help.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
capon30
G37 Sedan
4
Jul 25, 2024 04:39 AM
frank37
Audio, Video & Electronics
14
Feb 21, 2024 09:05 PM
neo4888
G37 Sedan
0
Sep 25, 2023 10:07 PM
Jon Yarber
Audio, Video & Electronics
6
Jul 25, 2019 01:57 PM
ug2215
General Tech Questions
8
Jan 1, 2019 12:00 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:51 PM.