Hello,

Awhile back, i had my front window broken into & was replaced. The window place vacuum the broken glass as much as possible.

Today, i was doing some cleaning in my car & the driver seats was not moving forward & back as usual. I am suspecting there are some broken glass caught up underneath.

There are (4) 14mm screws that needs to be removed for the front seats to come off. My question is, can I just remove the 2 from the back & tilt the seats a little toward the front to vacuum the broken glass from the rails or i need to remove the whole seat out of the car?

Thanks in advance.

 

Try it. If not remove the other two. Probably took you more time to make the post than to remove the seat.

 

We have a problem!!
please help.

i remove the 2 screws & lift the seat up..as i was adjusting the seats it is out align..

Cant get 2 the 2 screws in the front
any suggestion. Thnx

 

Try to move the seat backward to be able to get at the front bolts. May have to use a box wrench at this point.

 

thanks for the response. was able to use the box wrench. my seats motor actually went out. will ask for assistance on different thread. thanks agian.

 

I see. Sorry to hear. Goodluck.