P300 Code - Tried almost everything!
Thread Starter
Registered Member
Joined: Oct 2015
Posts: 73
Likes: 5
P300 Code - Tried almost everything!
Hello all,
I have read through countless threads relating to this issue and have spent over $1,000 trying to fix this issue to no avail! I recently installed a Stillen Gen3 intake and a few days later, got a CEL (P0300). Checked the vacuum lines, replaced spark plugs, ignition coils, and even a fuel injector (P302) in cylinder 2. After all of that, the two CELs are still on! If there is something that I might be missing, please let me know. Until then, I will continue to scour the forums for more useful info. Thanks!!!
I have read through countless threads relating to this issue and have spent over $1,000 trying to fix this issue to no avail! I recently installed a Stillen Gen3 intake and a few days later, got a CEL (P0300). Checked the vacuum lines, replaced spark plugs, ignition coils, and even a fuel injector (P302) in cylinder 2. After all of that, the two CELs are still on! If there is something that I might be missing, please let me know. Until then, I will continue to scour the forums for more useful info. Thanks!!!
Thread Starter
Registered Member
Joined: Oct 2015
Posts: 73
Likes: 5
Thread Starter
Registered Member
Joined: Oct 2015
Posts: 73
Likes: 5
It’s idling a little rough. Sounds cammed almost since I had a Stillen catback installed today. The shaking of the motor is noticeable. Other than that, the car is running fine. The most upsetting part is that I can’t take it home and enjoy the new sounds it makes!
I'd be tempted to reinstall the factory intake. Who knows, you may find the issue during disassembly.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
dkmesa350z
Private Classifieds
6
May 30, 2014 12:10 AM
XTRPerformance
Drivetrain
6
Jan 10, 2014 04:48 PM
XTRPerformance
Brakes/Suspension
6
Jan 10, 2014 04:33 PM
XTRPerformance
Interior/Exterior Items
5
Dec 12, 2013 02:13 PM
XTRPerformance
Engine/Intake/Exhaust
4
Dec 12, 2013 02:12 PM