I disconnected the battery and reconnected it a couple minutes later and what I discovered was that my windows automatically go down with the double click push, but I have to manually hold the button until it comes all the way up. It goes down with a click, but for some reason not while going up.

Could it be a fuse of some sort? Input would be appreciated!

Thank you

 

You need to reset them.. Instructions are in the manual.

 

got it! you have to hold the button for at least 3 seconds after the window has closed and it should reset.

thanks!

 

Start with the windows up.

roll them down with one click (not auto) and hold it for 10seconds after the window is all the way down.

then go up with one click (not auto) and hold it for 10seconds after the window is all the way up.


if it doesnt work try it the other way around going up first then down.

 

I dunno where people get all these high numbers and ups and downs and stuff. Just roll it up and hold for 3 seconds and done. It explains it all in the manual.

 

^ That's why I typically say RTFM, but I'm getting better.

 

well im pretty sure for the 1st gens it was up 10 down 10 or vice versa.

idk thats how i did it the other day and it worked soo.