Hello,
I am having trouble reading my automatic transmission oil tempratures with torque pro. It shows the value -56°C for both input and output (most of the other important PIDs seems to work fine).

When I go to the PID editor and try to test the PID it shows me a toast that says:

“OBD Header incorrect(‘Auto’ or hex(eg: ‘7E0’,’6A6C1F’) or ‘TCM’,’ABS’,’INS’,’PAM’)”

the current header is “7E1” for both the input and the output.

I am using PIDs that are imported from an excel file. (Attached the file here)

the friend who sent me the files connected his Bluetooth OBD and his phone to my car, and the PIDs worked fine for him.


The car is G37 sedan 2012.

I am using “ELM327 USB OBDII” (colored orange and blue).

Thank you

 

Looks like the excel sheet may have been corrupted or formatted incorrectly.

 

Downloaded again and ran it, it loaded fine this time. Haven't checked it on the car yet.

 

It works with my setup. Only thing is when i use the PIDs from the attached sheet, Torque stops updating all of the other sensors, so the only things that update are the trans temps.

 

thank you.
I just bought another OBD adapter (more expensive one), and it works as I wanted it to.

 

I gave up on it and used OBD fusion to get those temps.

 

Which adapter did you purchase?

 

I used OBD Fusion, Trans temp worked great but had trouble getting the Oil Temp to work. Are you able to get oil temps?