The Sedan Exhaust Thread
Registered Member
Joined: Nov 2018
Posts: 4
Likes: 0
From: Orlando
damn. Seems it’s about half the case. I went with the z1 y pipe and that one is very high quality.
Registered Member
Joined: Jul 2020
Posts: 14
Likes: 1
Need some pointers with my current setup!!
I am just running a muffler delete with new piping at the moment but looking to increase volume/crackles and pops.
Currently debating on going with berks resonated TP and then if this was too obnoxious for my early morning
startups i could install something like a magnaflow 11386 muffler in place of the stock Y pipe
How should i approach this??
(TLDR: I need more character to my exhaust as just the muffler delete is not cutting it)
I am just running a muffler delete with new piping at the moment but looking to increase volume/crackles and pops.
Currently debating on going with berks resonated TP and then if this was too obnoxious for my early morning
startups i could install something like a magnaflow 11386 muffler in place of the stock Y pipe
How should i approach this??
(TLDR: I need more character to my exhaust as just the muffler delete is not cutting it)
Registered Member
Joined: Jul 2017
Posts: 185
Likes: 39
I finally had some nice weather to get a video of the Fast Intentions catback! I included a lot of comparisons with my near-stock setup for reference. Not sure why the video itself isn't embedding into the post rather than just the link, so if a mod could fix that, that would be great!
[edit: FTFY]
Mods before FI catback:
- Takeda Long Tube Intakes with separate filters
- Z1 HFC
- Megan Y pipe
- OEM midpipe and mufflers
Current mods with the FI catback:
- Takeda Long Tube Intakes with separate filters
- Z1 HFC
- Fast Intentions 2.5" catback with 18" resonators
- Hotchkis Sways
[edit: FTFY]
Mods before FI catback:
- Takeda Long Tube Intakes with separate filters
- Z1 HFC
- Megan Y pipe
- OEM midpipe and mufflers
Current mods with the FI catback:
- Takeda Long Tube Intakes with separate filters
- Z1 HFC
- Fast Intentions 2.5" catback with 18" resonators
- Hotchkis Sways
Last edited by jfridge92; Aug 14, 2020 at 10:56 AM.
Registered Member
Joined: Jul 2017
Posts: 185
Likes: 39
Oh yes, it is so much better than the raspy mess that was on the car before. I was just surprised that even with the Z1 high flow cats, there is ZERO, and I mean ZERO rasp with the car now! The Z1 HFC's may as well be test pipes for as little catalyst material as they have, but the catback does a great job of soaking all that up. The first time I went WOT in the car with this setup, it made my face hurt because of how hard I was smiling. I am VERY happy with this purchase!
Right, right... you already have the Z1 HFC. I glossed right over the acronym. My bad.
Congrats on a solid upgrade, Fridge.
You've gone full muscle car with your Japanese 4dr, LOL.
Congrats on a solid upgrade, Fridge.
You've gone full muscle car with your Japanese 4dr, LOL.
Registered Member
Joined: Jul 2017
Posts: 185
Likes: 39
Hey! You may remember seeing me posting asking for help in regards to my custom exhaust build well i have now got my build planned out and am going to start placing part orders! I'd love to get some feedback on my plan and hear about any experiences from people using similar parts/setups.
G37x 2010 Sedan (I am doing this build in a series of stages, Currently car is in stage 1)
Stage 1 - Muffler delete with 2.5" pipe back to 4" tips
Stage 2 - Mid pipe & Y pipe removal, all new 2.5" pipe installed with 2 17930 Vibrant resonators as mid pipe going into a 11386 magnaflow resonated x pipe replacing the y pipe and making exhaust true dual.
Stage 3 - Finally once the custom cat back is done being fabricated the berk resonated test pipes will be added to finish off the build.
Let me know what you think about this setup! I wanted something custom and this seems like a cool unique build i think the exhaust note will be about x2 the volume of current muffler delete but hopefully with a little less drone/rasp
G37x 2010 Sedan (I am doing this build in a series of stages, Currently car is in stage 1)
Stage 1 - Muffler delete with 2.5" pipe back to 4" tips
Stage 2 - Mid pipe & Y pipe removal, all new 2.5" pipe installed with 2 17930 Vibrant resonators as mid pipe going into a 11386 magnaflow resonated x pipe replacing the y pipe and making exhaust true dual.
Stage 3 - Finally once the custom cat back is done being fabricated the berk resonated test pipes will be added to finish off the build.
Let me know what you think about this setup! I wanted something custom and this seems like a cool unique build i think the exhaust note will be about x2 the volume of current muffler delete but hopefully with a little less drone/rasp
I think you are making a good choice going with 2.5" piping and 18" Vibrant resonators to help cut down on the rasp. Looking forward to sound clips, that thing is going to be LOUD.
Moderador
Joined: Jun 2019
Posts: 2,626
Likes: 765
From: South Florida
I got my Vibrant Resonators installed today, and had the shop bend up some pipes after the resonators for custom midpipe since there aren’t really any options for the sedan. I already had the Tanabe Medallions and wanted to increase the sound, and it’s perfect, no drone, still quiet in the cabin, and gets louder when you get on it, but nothing too obnoxious.
Registered Member
Joined: Nov 2015
Posts: 126
Likes: 12
From: Massachusetts, USA
Take some pictures! My Y-pipe is leaking and I'm debating between matching my test pipes and the Y-pipe outlet or having a custom X-pipe gow ith my system.
Currently running ISR Resonated Test Pipes, Stock Y-pipe, Vibrant 1790 resonators on stock mid-pipe, and Tanabe Medallion Axlebacks. I never intended to do test pipes but my cats went out
Currently running ISR Resonated Test Pipes, Stock Y-pipe, Vibrant 1790 resonators on stock mid-pipe, and Tanabe Medallion Axlebacks. I never intended to do test pipes but my cats went out
Registered Member
Joined: Aug 2016
Posts: 127
Likes: 15
From: MA
I have Tanabe mid pipe, 2.5 to 3 ypipe with Vibrant 1142 3" Ultra Quiet Resonator, berk hfc, and Tanabe axle-back. It is very loud with alot of drone 1500-3000 range. After that it is manageable.
I could not stand it anymore so i took of axle-back and put original back.
I will relocate flex on ypipe and add two more Vibrant 1792 resonators...
If that will not help with drone.... next step Helmholtz resonator ....
I could not stand it anymore so i took of axle-back and put original back.
I will relocate flex on ypipe and add two more Vibrant 1792 resonators...
If that will not help with drone.... next step Helmholtz resonator ....
What did you end up doing to eliminate the drone? I also have a lot of drone from 1500-3000.
I have your exact setup except I have the Motordyne Resonated XYZ pipe. I don't want to cut into the Motordyne XYZ pipe. Did you end up cutting into your y-pipe like you mentioned?
I was planning on keeping the Tanabe axle-back but adding Vibrant 1143 Ultra Quiet resonators to the Tanabe mid-pipe between the resonators that come on the mid-pipe and the Tanabe mufflers:
Last edited by doctorg37xs; Sep 11, 2020 at 12:30 PM.
Registered Member
Joined: Feb 2017
Posts: 363
Likes: 46
Blast from the past, I know, but I see that you're still active on the forums.
What did you end up doing to eliminate the drone? I also have a lot of drone from 1500-3000.
I have your exact setup except I have the Motordyne Resonated XYZ pipe. I don't want to cut into the Motordyne XYZ pipe. Did you end up cutting into your y-pipe like you mentioned?
I was planning on keeping the Tanabe axle-back but adding Vibrant 1143 Ultra Quiet resonators to the Tanabe mid-pipe between the resonators that come on the mid-pipe and the Tanabe mufflers:
What did you end up doing to eliminate the drone? I also have a lot of drone from 1500-3000.
I have your exact setup except I have the Motordyne Resonated XYZ pipe. I don't want to cut into the Motordyne XYZ pipe. Did you end up cutting into your y-pipe like you mentioned?
I was planning on keeping the Tanabe axle-back but adding Vibrant 1143 Ultra Quiet resonators to the Tanabe mid-pipe between the resonators that come on the mid-pipe and the Tanabe mufflers:
On top of that I made multi chamber Helmholtz resonator.
Registered Member
Joined: Jun 2016
Posts: 1,071
Likes: 254
From: Milwaukee WI
I wasn't intending this for sound but since I haven't made a sound video for my new setup yet this will have to do.
ebay headers, thaitanium test pipes, and thaitanium hvr. I might take the rear resonators off since it has resonators on the test pipes as well as the ypipes and seems like over kill.
ebay headers, thaitanium test pipes, and thaitanium hvr. I might take the rear resonators off since it has resonators on the test pipes as well as the ypipes and seems like over kill.
Registered Member
Joined: Jun 2016
Posts: 1,071
Likes: 254
From: Milwaukee WI
.
Registered Member
Joined: Aug 2016
Posts: 127
Likes: 15
From: MA
