Sedan Chat Thread
#857
Because Racecar
iTrader: (14)
mine are blue :]
you can turn them off by rotating the **** at the end of your turn signal lever back to the "auto" setting.
High beams are not a separate bulb. On newer models it is a setting activated when a solenoid moves a reflector to change the angle of incidence of the main headlight beam.
Or, in laymans terms, it is a mirror-y thing that makes your beams point moar up, and away from the road.
The following 2 users liked this post by GoFightNguyen:
kOrE (01-09-2014),
warped ideas (01-09-2014)
#859
A quarter past stripped
So when the lights are ON manually the city lights come ON as well, but when the **** is rotated back to AUTO the city lights stay OFF. That's interesting, I never checked that out.
#861
Premier Member
iTrader: (7)
Would still be happy to get additional pics for you if you would like. I have some pics I need to post of the Z1 hoses and of the FI cats. I don't think I ever posted them.
#863
A quarter past stripped
Looks like connoisseurr beat me to it. Long night sorry, wound up finishing my flappy paddle install, pulling my engine bay plastics (need some color), redoing the intakes again with the Z1 hoses and helping a buddy install his headlights and put his front end back on.
Would still be happy to get additional pics for you if you would like. I have some pics I need to post of the Z1 hoses and of the FI cats. I don't think I ever posted them.
Would still be happy to get additional pics for you if you would like. I have some pics I need to post of the Z1 hoses and of the FI cats. I don't think I ever posted them.
#867
Registered Member
Erm, so I'm going to say this is an 07-09 sedan, and the light that is on next to the headlights is the fog light, NOT the city light. This is switched by the secondary switch on the turn signal stalk. Kind of hard to describe, but if the outside of the stalk rotates from off/parking/auto/on, the switch that controls the fog lights are on the inside of the stalk (closer to the steering column). The fog lights should only function when switch to the "on" position AND the headlights are turned on (not sure if they work with just the parking lights, never tested it).
The following users liked this post:
kOrE (01-09-2014)
#869
Administrator
iTrader: (9)
You mean long-tube headers to replace the OEM shorties and cats? I don't think anyone in this thread.
I still remember (with some humility) that one of the first things I learned on this site was that the G37 exhaust manifolds were actually headers. Didn't know that until after buying the car.
I still remember (with some humility) that one of the first things I learned on this site was that the G37 exhaust manifolds were actually headers. Didn't know that until after buying the car.
#870
Administrator
iTrader: (9)
Looks like connoisseurr beat me to it. Long night sorry, wound up finishing my flappy paddle install, pulling my engine bay plastics (need some color), redoing the intakes again with the Z1 hoses and helping a buddy install his headlights and put his front end back on.
Would still be happy to get additional pics for you if you would like. I have some pics I need to post of the Z1 hoses and of the FI cats. I don't think I ever posted them.
Would still be happy to get additional pics for you if you would like. I have some pics I need to post of the Z1 hoses and of the FI cats. I don't think I ever posted them.
Thanks, guys. Very decent of you each to humor me on this snipe hunt.
So from this I'm concluding the OEM cats on the G37 have no markings on them to identify them as OEM, except for the heatshield... which I can't see as being relevant. Heat shields on just about every car made end up getting ripped off long before the exhaust component gets replaced.
Hmm. I feel better about this. Assuming I get inspected this March, just before the cats are installed, then I'll have a year of driving around with FI cats, and they'll probably look a little more worn in, easily passed off as OEM for an inspection, as long as the shop wasn't Nissan/Infiniti.
I'm probably way over-thinking this crap, but that sounds about right, don't you think?