Show off your Sedans!
I've been lurking and learning on the site for a little while, but I finally got my wheels mounted last night after UPS damaged one of them in transit the first time and having to wait for a replacement 
I think I'm going to adjust the front just a hair lower, or raise the rear a tiny bit for a little bit of a rake, but here's how she looks in the work parking lot.
Edit:
Wheels are Velgen VMB5's
20x9"F +30 (+35 with a 5mm spacer) and 245/35/20 Hankook v12's
20x10.5"R +45 with 285/30/20 Hankook v12's



I think I'm going to adjust the front just a hair lower, or raise the rear a tiny bit for a little bit of a rake, but here's how she looks in the work parking lot.
Edit:
Wheels are Velgen VMB5's
20x9"F +30 (+35 with a 5mm spacer) and 245/35/20 Hankook v12's
20x10.5"R +45 with 285/30/20 Hankook v12's


Finally have something worth showing, please excuse the crappy cellphone pictures. Just got my wheels on today. 2013 OB G37. Wheels are Niche Targa Anthracite 20x8.5
Nothing else done besides tint and debadging the infiniti lettering on the trunk. Definitely needs a drop and that'll be coming sometime this summer. Planning on going with Tein S-Tech's.


Nothing else done besides tint and debadging the infiniti lettering on the trunk. Definitely needs a drop and that'll be coming sometime this summer. Planning on going with Tein S-Tech's.


this made me laugh pretty hard haha 
here's one i took for you!

sure thing. I did mine a little different. Looking around at most people's, it seems like they paint the entire shroud that goes inside the headlight. To me, it looks like two separate surrounds/shrouds in the headlight, so i decided to carefully tape off the inside surround. The amber corner piece is also slightly tinted, looks darker in the picture for some reason


thanks! I was going to get it wrapped when i got my window trim wrapped, but at the time i wasn't sure if i'd like it and i remember seeing a member here that had a tough time with his wrap and had to go to two different shops to get it right and still isn't completely happy, so it made me a little nervous lol.
For right now i decided to try my luck with plastidip (i know, i know) to see if i'd like the look. So far i'm actually pretty happy with it. It actually came out really well and doesn't look bad like most dipped stuff i've seen
in the same sense, i really want the stillen roof spoiler, but wasn't sure if i'd like the way one looked on my car. I decided to take a chance on the cheap paint matched one on ebay for only $80. It actually looks alright to me, and it's stuck on there pretty good
one day i'll probably get a real diffuser and a stillen roof spoiler, but right now i have a wedding to plan/pay for
here's another shot i took a few days ago when i was leaving for work

i've tried to take measurements at like 8 different "flat" parking lots and i've gotten 8 different numbers lol. It's right around 26" or a hair higher in the front and a tad higher in the rear. I was able to adjust my exhaust a tiny bit higher by the cats and haven't scrapped on a single thing since.


here's one i took for you!

sure thing. I did mine a little different. Looking around at most people's, it seems like they paint the entire shroud that goes inside the headlight. To me, it looks like two separate surrounds/shrouds in the headlight, so i decided to carefully tape off the inside surround. The amber corner piece is also slightly tinted, looks darker in the picture for some reason


thanks! I was going to get it wrapped when i got my window trim wrapped, but at the time i wasn't sure if i'd like it and i remember seeing a member here that had a tough time with his wrap and had to go to two different shops to get it right and still isn't completely happy, so it made me a little nervous lol.
For right now i decided to try my luck with plastidip (i know, i know) to see if i'd like the look. So far i'm actually pretty happy with it. It actually came out really well and doesn't look bad like most dipped stuff i've seen
in the same sense, i really want the stillen roof spoiler, but wasn't sure if i'd like the way one looked on my car. I decided to take a chance on the cheap paint matched one on ebay for only $80. It actually looks alright to me, and it's stuck on there pretty good
one day i'll probably get a real diffuser and a stillen roof spoiler, but right now i have a wedding to plan/pay for

here's another shot i took a few days ago when i was leaving for work

i've tried to take measurements at like 8 different "flat" parking lots and i've gotten 8 different numbers lol. It's right around 26" or a hair higher in the front and a tad higher in the rear. I was able to adjust my exhaust a tiny bit higher by the cats and haven't scrapped on a single thing since.

Thanks! The grille is the OEM midnight black one.
Ended up parking next to a nice TL the other day, so I decided to snap a picture lol.

I also got my car aligned and everything is great. Only running -1.0 degree of camber in the front and -1.4 in the rear with the toe zero'd out in the front and rear.
Ended up parking next to a nice TL the other day, so I decided to snap a picture lol.

I also got my car aligned and everything is great. Only running -1.0 degree of camber in the front and -1.4 in the rear with the toe zero'd out in the front and rear.
Thanks! The grille is the OEM midnight black one.
Ended up parking next to a nice TL the other day, so I decided to snap a picture lol.

I also got my car aligned and everything is great. Only running -1.0 degree of camber in the front and -1.4 in the rear with the toe zero'd out in the front and rear.
Ended up parking next to a nice TL the other day, so I decided to snap a picture lol.

I also got my car aligned and everything is great. Only running -1.0 degree of camber in the front and -1.4 in the rear with the toe zero'd out in the front and rear.
Your car is the straw that broke the camel's back. I'm going to have to pull the trigger on the sport lip. It just completes the look of the car.
My 2009 6mt. Stillen Gen 3 intakes, V3 Motordyne ART Pipes, Megan Y-Pipe, Topspeed exhaust, Hotchkis sway bars, short shift kit with a tomei shift ****. Tein S-Tech springs getting installed this weekend.














