Finally got around to washing both the rides
Finally got around to washing both the rides
We I finally got around to washing both of my cars today. It had been about 2 months for the G and 6 months for the Integra. (although the integra almost never gets driven)
I got a new Canon 50mm lens so I to try it out, seems to work pretty good.







I got a new Canon 50mm lens so I to try it out, seems to work pretty good.







Nice clean & classy G, those wheels & drop really stand out. What wheels (size & offsets) are you running and what are you dropped on? Really like that look, oh & what camber are you at the back?
The lens is a Canon EF 50mm F/1.4 USM. One of my new favorite lenses. You can really shoot great at night. All of the shots I took today were hand held.
I'm running on the Eibach Pro Kit with Tokico Blue shocks and I cut 1 coil off of the springs for a slightly lower drop. The wheels are XXR 521 20x8.5" +32 with 245/35-20 tires and 20x10.5" +30 with 255/35-20 tires. For the rear camber, I haven't gotten it aligned yet so I don't know the exact amount but from looking I would say about -1.5 to -2 degrees.
That drop really looks good
Trending Topics
I only shortened the front springs because the rear drop was nice. Even after the eibach the front still looked like a 4x4, but now its a nice even drop.
I know, 2 months it far too long. Its already raining again here is So Cal so the fresh wash job is destroyed.
I always have to hand wash it now with the wider wheels because any of those run through car washes will destroy the wheels.The Integra is only for track use now. Here is a little pic of the sneak flat black intercooler.
ok now i REALLY have to get the sport bumper. i have the 2010 silver journey. it looks good but not as good as the ones with Sport bumper. Now that i've seen it in your pics, i'm gamed into buying the sport bumper and lip.
btw car looks super sweet
btw car looks super sweet
nice looking setup. how are you managing driveways & speedbumps with you ride height? are you doing OK? i just took my prokit off a while back, and one of the problems i had was scraping on speedbumps etc...





