G37 Coupe

2009 G37 Instrumental and Gauge Cluster not working, Car won't start

Thread Tools
 
Search this Thread
 
Old Jun 25, 2025 | 11:24 AM
  #1  
boisphotography's Avatar
boisphotography
Thread Starter
Registered Member
 
Joined: Jun 2025
Posts: 2
Likes: 1
2009 G37 Instrumental and Gauge Cluster not working, Car won't start

Hello Everyone,

First post need help!

Yesterday I was able to start my G37 but the instrumental and gauge cluster did not turn on and was able to run and drive to work. On my way back my car died and I had to push the vehicle until I could get it towed back to the driveway. So far I have tested some of the fuses and grounds with a multimeter and also I had tested the battery which seemed in good shape. The car does not start since the initial death. It clicks but doesn't turnover. If anyone has had a similar problem I would love some advice. The model is 2009 Infiniti G37s coupe. Thank you for the help.

So far we have checked the fuses and replace the starter, it is still clicking but not turning over still.

Last edited by boisphotography; Jun 26, 2025 at 08:19 PM. Reason: update for work
Reply
Old Jul 18, 2025 | 03:54 PM
  #2  
McStealth's Avatar
McStealth
Registered Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2015
Posts: 52
Likes: 1
From: Texas Hill Country
Originally Posted by boisphotography
Hello Everyone,

First post need help!

Yesterday I was able to start my G37 but the instrumental and gauge cluster did not turn on and was able to run and drive to work. On my way back my car died and I had to push the vehicle until I could get it towed back to the driveway. So far I have tested some of the fuses and grounds with a multimeter and also I had tested the battery which seemed in good shape. The car does not start since the initial death. It clicks but doesn't turnover. If anyone has had a similar problem I would love some advice. The model is 2009 Infiniti G37s coupe. Thank you for the help.

So far we have checked the fuses and replace the starter, it is still clicking but not turning over still.
I had a starter issue that was wrongly diagnosed as a solenoid problem. Have you bench tested the starter? Both starters for that matter? Not sure if that would coincide with a blank screen though.
Good Luck.
Reply
Old Jul 23, 2025 | 05:44 PM
  #3  
boisphotography's Avatar
boisphotography
Thread Starter
Registered Member
 
Joined: Jun 2025
Posts: 2
Likes: 1
My friend and I found the issue, I had a faulty reverse taillight that was causing a fuse to blow every time I went to reverse! Thank you for your help, it is much appreciated!
Reply
Old Jul 24, 2025 | 11:12 AM
  #4  
McStealth's Avatar
McStealth
Registered Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2015
Posts: 52
Likes: 1
From: Texas Hill Country
Fuse

Originally Posted by boisphotography
My friend and I found the issue, I had a faulty reverse taillight that was causing a fuse to blow every time I went to reverse! Thank you for your help, it is much appreciated!
So it was the blown fuse that actually kept the car from starting. What made you look at the fuses?

David
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
carterryanf
G37 Sedan
0
Aug 31, 2023 09:05 PM
BrokenBoy
Audio, Video & Electronics
11
May 9, 2021 08:02 PM
g37tx
Engine, Drivetrain & Forced-Induction
11
Jun 17, 2016 02:28 PM
G37FTW
Engine, Drivetrain & Forced-Induction
7
Feb 5, 2015 02:04 PM
9Gear x
G37 Sedan
5
Nov 22, 2014 03:00 PM




All times are GMT -4. The time now is 03:25 AM.