The brand new gaskets should be arriving today as well according to the tracking info!! You really are going to fall in love with the sound of that exhaust! As much as I love the looks of my Ark I definitely miss my Greddy everyday! But I know it's going to a good home!

 

interesting that most folks debadge but you went completely the opposite..

 

Just in case y'all were wondering how I did it..... LED Brake Light Car Logo Light Additional Letter Brake Lights with Suction Cup LED Refit Car Light for Infiniti G25/35/37 JX35-in Light Source from Automobiles & Motorcycles on Aliexpress.com | Alibaba Group, https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1, and some black reusable cable ties from home depot. There's a hole at the bottom of the fog light compartment where you can pass through the wire to connect to the fog light. Then i just went in through the driver side wheel well.

 

Switch Memory Module added to the VDC.
When I turn it off, it stays off.

 

I like that SMM. Great idea.

 

Yeah man that SMM is definitely pretty cool. Good job rovert

 

Today I modified my IJDMToy license plate mount. I know that there is a stillen license plate mount for about $85 before shipping to Mount the plate to the tow hook. I didn't want to spent that much money so I bought the IJDMToy one for like $30 on amazon. Once it came in and I installed it, no matter how tight I made the center screw it would still not hold steady and any little bump I would hit would cause the plate to become crooked. I went to home depot and picked up a bracket that would allow the plate mount to be held up in 2 spots (rather than one) and a couple of lock nuts for about $3 and my problem was solved. Hope this helps with some other people who don't want to spend $85 for a plate relocate. Check out the pictures below to see how I modified it.


What IJDMToy sent me along with 1 screw, 2 rubber washers to attach the black plate to the rod and 4 screws to attach the license plate to the black plate




My modifications






How it looked after

 

blue loctite woulda probably solved it

 

Tried it and it didn't work I guess there was too much weight in the plate

 

weird i bought my bracket from ebay for 20 something dollars. i used loctite upon first install. i had no issues with it moving

 

Loctite did not work for me neither. And thanks to the other guy I can solve my issue

 

Rovert does this do the same thing as putting the toggle on the green wire to the yaw sensor?if not what does this do?need detailed I talk instructions and link to where you got you s.m.m?

 

Hi, no this does not disable the Yaw sensor.
It only Gives you control over the VDC.
The default for VDC is always on, unless you turn it off with the switch.
Normally if you turn VDC off it comes back on the next time you start your car.
The switch memory module remembers the state of VDC when the ignition is turned off & duplicates that state the next time the car is started.
So it will turn VDC off or on depending on the previous setting.
Unfortunately or fortunately depending on how you look at it, my 370GT being a JDM sports pack it has 4WS. One of the main inputs for the 4WS is the Yaw sensor, so, much harder to take it out of the picture.
That said, this incarnation of Nissans 4WS is pretty friggin good.
Cheers,
Trevor.

 

I received front and rear spacers, and a set tuner lug nuts that are surprisingly color-matched to my copper calipers.



Oh, and I returned an 11-year old Craftsman torque wrench to Sears and got a new replacement n/c & NQA.

 

I just bought one today!!!!!!!