The door locks on both sides of my 2011 coupe is starting to fail. I want to install the aftermarket actuators which looks pretty easy. My only question is which and where are the wires that I need to tap into to activate the new actuators? Thanks for any help.

 

Have you tried following the FSM?

http://www.nicoclub.com/FSM/G37/Coupe/2011/DLK.pdf

Just replacing parts without proving the root cause can end up costing you time and money.

Your problem could be the BCM or the wiring harness?

Telcoman

 

I can hear the actuator trying to move the lock but sometimes it only moves it a little and not enough to fully lock or unlock the door. I've looked at the FSM and found the plug and pin that is for the lock but it looks like I will have to take a lot of stuff off the door to get to it. I was wondering if any had done this on the g37 and know what colors the wires were.