Need help making q60 louder
Thread Starter
Registered User
Joined: May 2016
Posts: 8
Likes: 0
A quick pull with Topspeed Pro 1 Axle Ba
Attachment 120632
I have a topspeed pro 1 axle back. And these pictures are before i put on the extensions. The exhaust pipes were too short and were burning the bottom of the bumper and thats why i got extensions welded on. The topspeed pro 1 axle back is for 08-13 g37 coupes and even though the engine is the same, the piping lengths are different as I was told by a representative from Topspeed. At first I was content with the sound but now it only sounds good on certain days for some reason.
Thanks for the inputs
I have a topspeed pro 1 axle back. And these pictures are before i put on the extensions. The exhaust pipes were too short and were burning the bottom of the bumper and thats why i got extensions welded on. The topspeed pro 1 axle back is for 08-13 g37 coupes and even though the engine is the same, the piping lengths are different as I was told by a representative from Topspeed. At first I was content with the sound but now it only sounds good on certain days for some reason.
Thanks for the inputs
Vibrant Performance
.adding a Y pipe doesn't do squat for sound. I have tested that theory myself.
This is just my 02 cents.
Thread Starter
Registered User
Joined: May 2016
Posts: 8
Likes: 0
http://www.ebay.com/itm/391346414101?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.com/itm/331343125678?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
These are the two things that I've narrowed it down to.... Which one would you recommend? And would either one make a noticeable difference?
http://www.ebay.com/itm/331343125678?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
These are the two things that I've narrowed it down to.... Which one would you recommend? And would either one make a noticeable difference?
They're going to equally make a couple ponies and add some noise, make your pick man. Just be aware you will likely get a check engine light, you wont pass emissions or inspections if they require it and your car will stink without cats.. I absolutely recommend you get high flow cats, but its your car.
They're going to equally make a couple ponies and add some noise, make your pick man. Just be aware you will likely get a check engine light, you wont pass emissions or inspections if they require it and your car will stink without cats.. I absolutely recommend you get high flow cats, but its your car.
Yep what kris said.
Registered Member
Joined: Jan 2015
Posts: 135
Likes: 23
From: Toronto
Looks like you have the axleback with resonators, which are tame and somewhat quiet. I would recommend HFC to make it a couple levels louder. Removing the OEM resonator will probably make your car sound raspy.
Thread Starter
Registered User
Joined: May 2016
Posts: 8
Likes: 0
Thanks for all the inputs guys. I guess I'll go with the HFC's like you all suggested. Now the question is should i go with the resonated HFC's or the non resonated HFC's? Whats the difference between them? 
Very unlikely, plus you'll save the ozone a bit and your hot date wont dump you for making her hair smell like chemicals. It gets nauseating man, and I love cars and the smell of race gas etc..
Thread
Thread Starter
Forum
Replies
Last Post
RANDY350Z
Audio, Video & Electronics
0
Mar 26, 2016 11:14 PM
