Had all the codes thrown for the gallery gasket p0021, p0011, and p0524, upon changing them the bigger one may have been split but the smaller one was completely intact. While I had everything taken apart I tested the vvt solenoids to make sure they were good, and bank 2 wasn't functional. So I replaced it, and now that I have everything out back together the other codes have gone away except the p0021 and I swapped the camshaft sensors and reset the codes to see if it was that, but still just threw p0021, wondering if someone knew maybe what to check next thanks in advanced.

 

To specify before I worked on it car was stuck in limp mode, now it's not anymore. Also replaced cam cover gaskets, and vehicle did throw p0300, I feel because of the p0021, but the oil pressure is good now.. car stutters on acceleration..
​​​​​​