Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

Frustrated after trying to replace clutch

Thread Tools
 
Search this Thread
 
Old Apr 8, 2022 | 05:13 PM
  #1  
alangarcia376's Avatar
alangarcia376
Thread Starter
Registered User
 
Joined: Apr 2022
Posts: 1
Likes: 0
Frustrated after trying to replace clutch

Hoping someone could help me. Recently replaced clutch and flywheel on my 2008 G37 as well as the transmission. I bought the V2 Road Race Clutch & Flywheel Kit from z1 motorsports and the transmission from the Infiniti dealership. Finished replacing it a week ago and car would only crank and not start and after looking on some forums I realized I hadn't aligned the flywheel correctly so I dropped the transmission again and fixed it but again car would only crank and not start. Also car will only crank if its being jumped with another car, if its not then it just clicks and completely dies. Battery is also brand new so I am really stumped. Car also turned on fine before pulling it into the garage.


Reply
Old Apr 13, 2022 | 01:54 PM
  #2  
hoyshnin's Avatar
hoyshnin
Registered Member
 
Joined: Apr 2019
Posts: 40
Likes: 9
Are you sure you connected all the sensors back up? IIRC, there are 3-4 sensors that you have to disconnect when dropping the transmission.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Z97
Engine, Drivetrain & Forced-Induction
1
Mar 20, 2017 02:18 PM
gimmeshelter67
Engine, Drivetrain & Forced-Induction
28
Nov 11, 2016 10:38 AM
Scott21390
Engine, Drivetrain & Forced-Induction
3
Mar 14, 2016 10:42 AM
Crewnecks
Brakes & Suspension
4
Nov 9, 2014 03:25 PM
Jakex1
Engine, Drivetrain & Forced-Induction
32
Mar 29, 2010 08:50 PM




All times are GMT -4. The time now is 12:51 AM.