Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

To change fluids or not

Thread Tools
 
Search this Thread
 
Old May 21, 2018 | 01:51 PM
  #1  
wowwed's Avatar
wowwed
Thread Starter
Premier Member
iTrader: (2)
 
Joined: Feb 2009
Posts: 151
Likes: 12
From: Henderson, NV
To change fluids or not

My 60K is coming up and I plan on getting most of my fluids changed, but the thing is in September I'll be gone for a year. Should I get new fluids before I let it sit for a year, or do it when I get back?
Reply
Old May 21, 2018 | 03:10 PM
  #2  
slartibartfast's Avatar
slartibartfast
Super Moderator
10 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Oct 2014
Posts: 6,105
Likes: 842
From: Houston, Tx
Before. This will help protect the car while sitting.
Reply
Old May 21, 2018 | 06:10 PM
  #3  
GdaddyNY's Avatar
GdaddyNY
Registered Member
 
Joined: Nov 2017
Posts: 239
Likes: 30
From: NY, New York
Originally Posted by slartibartfast
Before. This will help protect the car while sitting.
^^^Yes. What Slartibartfast said. Antifreeze and brake fluid can become corrosive
Reply
Old May 22, 2018 | 02:16 PM
  #4  
wowwed's Avatar
wowwed
Thread Starter
Premier Member
iTrader: (2)
 
Joined: Feb 2009
Posts: 151
Likes: 12
From: Henderson, NV
Perfect! Thanx for the input.
Reply
Old May 25, 2018 | 10:59 AM
  #5  
si_driver's Avatar
si_driver
Registered Member
 
Joined: Jul 2005
Posts: 331
Likes: 50
From: Baltimore/Annapolis
Originally Posted by GdaddyNY


^^^Yes. What Slartibartfast said. Antifreeze and brake fluid can become corrosive
Can I guess, but will it really cause a problem. My daily driven G35 has 270k miles on it right now, the coolant has only been changed once at 120k miles when the radiator had a small leak and the brake fluid was changed once at about 140k ............ no issues with the either still.
Reply
Old May 25, 2018 | 02:21 PM
  #6  
slartibartfast's Avatar
slartibartfast
Super Moderator
10 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Oct 2014
Posts: 6,105
Likes: 842
From: Houston, Tx
Brake fluid REALLY, REALLY wants to absorb water. Any time you pop the cap of the reservoir, humidity is pulled out of the air. This water will corrode aluminum and mild steel parts over time as well as lower the stated boiling point.

Coolant shouldn't be an issue unless a head gasket isn't sealing. Combustion products will enter the cooling system and some of these products are organic acids. In addition, additives for lubing the water pump wear down over time.

So, fresh fluids will provide full protection over long-term storage.
Reply
Old May 25, 2018 | 09:06 PM
  #7  
hurleyguys's Avatar
hurleyguys
Registered User
 
Joined: Apr 2016
Posts: 273
Likes: 34
or you can drain it completely of all it fluids before you leave then just fill it up again once you get back.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
clutch5
G37 Sedan
11
Feb 23, 2011 01:40 PM
consultant1027
General Tech Questions
1
Oct 9, 2010 03:27 PM
Retromoe
Engine, Drivetrain & Forced-Induction
8
Jan 25, 2009 06:38 PM




All times are GMT -4. The time now is 04:56 AM.