Ok so thought I would start a new thread, Because not broke down any more but turned into a bulid thread, So here goes, I am trying to see if I can see close to 500WHP with the Stillen SC . Mod list is below. Thanx for all the help in the broke down thread,
　
Super Charger Upgrade SCI to SI
34 Tooth Count Jackshaft Pulley
30 Tooth/35mm Supercharger Pulley
Gates belt Part numbe 560 8M GT20 for the cog pulleys
idler assembly from a 03-05 350z bracket
Bosh EV14 Injectors 850CC
UPREV MAF's
NGK plugs DILKAR8A8
WAT001026 Frozen boost.com Heat exchanger
Upgraded Intel pipe 2.75

 

Gonna be a good time

 

Might make it. It will be close but you might want to add a carbon drive shaft to that list.

 

Glad to see everything worked out.

 

Thanx guys, Seymore YES IT WILL,

Carbon Driveshaft?? They dont make one for the X Coupes..

 

Not yet they dont. Lol

 

Wont, No demand for them.. Thats what Z1 told me about their Alumn Shaft,,

The X guys always get the "shaft"

 

Nice! GL with your build

 

Forgive me if this is a dumb question what do u mean by sci to si?

 

doesn't seem fair for you guys.

 

The SCI is the modle supercharge ( base is starter EX). The SI will.flow more and the impeller will spin up faster creating more PSI also. SI a upgrade for more HP
question are never dumb,

 

Count down begins, The SC is on a UPS truck on its way back to me, Just made my APT for my return for the 25th, Hope 11 days is long enough to get everything together, So excited,

 

Congrats man!

Should be pretty easy to get everything back in there.

 

Thanx WEI, I'm hoping so,

 

Any updates.... Its past the 25th