Help Just Ordered my 4.08 Final Drive
I don't know what to tell you about the sedan's, I didn't ask any direct questions about them.
I did just get off the phone with Richard from Uprev and he says the wheel speed signal comes from the ABS control unit and he has no control over that at this time. They work solely with the ECU he says. But, I had to tell him that the manuals did not lose cc when changing gears and that was news to him, he thought they did.
So if you have an auto, no cruise control for you.
I did just get off the phone with Richard from Uprev and he says the wheel speed signal comes from the ABS control unit and he has no control over that at this time. They work solely with the ECU he says. But, I had to tell him that the manuals did not lose cc when changing gears and that was news to him, he thought they did.
So if you have an auto, no cruise control for you.
Then yes. As far as I know, your stock housing and axle stub shafts would work with a Quaife differential and the 4.08 gears.
I still suggest you give someone like Z1 a call to double check and cover all your bases.
I still suggest you give someone like Z1 a call to double check and cover all your bases.
I will. I was just thinking would the 4.08 gears make my 1st n 2nd gear useless on a 7at. I'm assuming I'll just burn rubber. My rear tires are 265 I can't really go wider
Thread
Thread Starter
Forum
Replies
Last Post
KZK
Canada
0
Aug 20, 2015 09:36 PM
KZK
Canada
0
Aug 13, 2015 06:17 AM
